Author Topic: e torx question  (Read 1631 times)

0 Members and 4 Guests are viewing this topic.

Offline dexetr30

  • 4BangerJP.com® Donator
  • Member
  • *
  • Posts: 1261
  • Aloha Mr. Hand!
e torx question
« on: November 25, 2007, 01:54:03 PM »
Are the bolts holding the starter on E-12's? I need to replace my starter and don't want to have to purchase the entire set if I don't have to.
02 2.5.L automatic: 4.0L t.b., 4.0l air intake, K&N filter, Scream'n Demon coil, 8.5mm MSD Super Conductor plug wires, Stage 1 Jet Chip, 29" BFG all terrain KO's. Taurus E-fan, Hummer front bumper, Skyjacker high capacity trans pan, 48" hi-lift, Rubi susp w. 3/4" BB.

lanulos89

  • Guest
Re: e torx question
« Reply #1 on: November 25, 2007, 03:10:03 PM »
buy them if you cant get the right one, and make sure its right before you wrench away  trust me

Offline dexetr30

  • 4BangerJP.com® Donator
  • Member
  • *
  • Posts: 1261
  • Aloha Mr. Hand!
Re: e torx question
« Reply #2 on: November 25, 2007, 04:56:47 PM »
buy them if you cant get the right one, and make sure its right before you wrench away  trust me

I'm going to get them/it. I'd rather only by one though as apposed to the entire set if I can help it. Christmas is coming and I don't have a lot of $$$ to spare right now. So... can anyone tell me if it's an E-12?
02 2.5.L automatic: 4.0L t.b., 4.0l air intake, K&N filter, Scream'n Demon coil, 8.5mm MSD Super Conductor plug wires, Stage 1 Jet Chip, 29" BFG all terrain KO's. Taurus E-fan, Hummer front bumper, Skyjacker high capacity trans pan, 48" hi-lift, Rubi susp w. 3/4" BB.

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: e torx question
« Reply #3 on: November 25, 2007, 06:25:04 PM »
On mine, they are E12
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

dirtyjeep95

  • Guest
Re: e torx question
« Reply #4 on: November 25, 2007, 06:55:07 PM »
Are the bolts holding the starter on E-12's? I need to replace my starter and don't want to have to purchase the entire set if I don't have to.
yes they are e 12's i just had to change mine so i'm positive, if you get up to dallas pa i got one you can borrow, let me know

Offline dexetr30

  • 4BangerJP.com® Donator
  • Member
  • *
  • Posts: 1261
  • Aloha Mr. Hand!
Re: e torx question
« Reply #5 on: November 25, 2007, 08:02:31 PM »
Thanks for the info fellas.

Thanks for the offer dirtyjeep95. I'm going to pick one up tomorrow at Sears. I hate going the mall this time of the year but if it means I'm acquiring another tool then I'll brave the traffic and Christmas shopping crowds.

As for getting out to Dallas... The wife and I go through there Several times a week. We have a boat house out on Harvey's Lake and a lot of family in the area. We'll have to get together some time and do some wheeling.  :weee:  :thumb:
02 2.5.L automatic: 4.0L t.b., 4.0l air intake, K&N filter, Scream'n Demon coil, 8.5mm MSD Super Conductor plug wires, Stage 1 Jet Chip, 29" BFG all terrain KO's. Taurus E-fan, Hummer front bumper, Skyjacker high capacity trans pan, 48" hi-lift, Rubi susp w. 3/4" BB.

DodgeMudder

  • Guest
Re: e torx question
« Reply #6 on: November 26, 2007, 01:06:11 PM »
Just use a 12point socket on them works fine, I can't remember the exact size that fits it, but thats what I use, and it saves me from buying extra tools I really don't need.

Jesse-James

  • Guest
Re: e torx question
« Reply #7 on: November 26, 2007, 01:15:50 PM »
Worked for me too.

Offline chardrc

  • Member
  • Posts: 3535
Re: e torx question
« Reply #8 on: November 26, 2007, 02:23:57 PM »
12 point didn't work for me.. i was lucky the e12 got it out after the 12 point.
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: e torx question
« Reply #9 on: November 26, 2007, 04:01:57 PM »
Just use a 12point socket on them works fine, I can't remember the exact size that fits it, but thats what I use, and it saves me from buying extra tools I really don't need.

Never use the right tool for the job.  All you need is a hammer, adjustable wrench and a vice grips for any job  :blbl:
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

flyingbrick

  • Guest
Re: e torx question
« Reply #10 on: November 26, 2007, 06:02:59 PM »

Never use the right tool for the job.  All you need is a hammer, adjustable wrench and a vice grips for any job  :blbl:
[/quote]

Hey man once i saw two Filipino guys pull the head off a Honda with just a hammer, adjustable wrench and a tyre iron (they found)  in a junk yard so dont knock it

Offline chardrc

  • Member
  • Posts: 3535
Re: e torx question
« Reply #11 on: November 26, 2007, 08:18:09 PM »
Just use a 12point socket on them works fine, I can't remember the exact size that fits it, but thats what I use, and it saves me from buying extra tools I really don't need.

Never use the right tool for the job.  All you need is a hammer, adjustable wrench and a vice grips for any job  :blbl:

those are what i used to get my trac bars off my jeep after the correct tool for the job shattered into 4 pieces.
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: e torx question
« Reply #12 on: November 26, 2007, 08:26:37 PM »
This thread kinda reminds me of this:

Man Hurt Using Shotgun to Loosen Lug Nut

Nov 12, 2007

SOUTHWORTH, Wash. (AP) — A man trying to loosen a stubborn lug nut blasted the wheel with a 12-gauge shotgun, injuring himself badly in both legs, sheriff's deputies said.

The 66-year-old man had been repairing a Lincoln Continental for two weeks at his home northwest of Southworth, about 10 miles southwest of Seattle, and had gotten all but one of the lug nuts off the right rear wheel by Saturday afternoon, Kitsap County Deputy Scott Wilson said.

"He's bound and determined to get that lug nut off," Wilson said.

From about arm's length, the man fired the shotgun at the wheel and was "peppered" in both legs with buckshot and debris, with some injuries as high as his chin, according to a sheriff's office report.

"Nobody else was there and he wasn't intoxicated," Wilson said.

The man was taken to Tacoma General Hospital with injuries Wilson described as severe but not life-threatening.


http://ap.google.com/article/ALeqM5jLAE9HuEZg17QRe1lpqLc_tDYLjAD8SSA6200
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline dexetr30

  • 4BangerJP.com® Donator
  • Member
  • *
  • Posts: 1261
  • Aloha Mr. Hand!
Re: e torx question
« Reply #13 on: November 26, 2007, 08:59:13 PM »
That article is amusing. I've done some dump things to help me get things finished sometimes but I can't imagine doing that one.
02 2.5.L automatic: 4.0L t.b., 4.0l air intake, K&N filter, Scream'n Demon coil, 8.5mm MSD Super Conductor plug wires, Stage 1 Jet Chip, 29" BFG all terrain KO's. Taurus E-fan, Hummer front bumper, Skyjacker high capacity trans pan, 48" hi-lift, Rubi susp w. 3/4" BB.