« previous next »
Pages: [1]   Go Down

Author Topic: door hinges  (Read 1279 times)

0 Members and 1 Guest are viewing this topic.

Offline zowtiak

  • Member
  • Posts: 40
door hinges
« on: November 09, 2009, 12:13:10 AM »
Gotta keep the cost down , so i am going to experiment with some homemade 1/2 doors. Any ideas where to get some hinges on the cheap?
Logged

Offline neale_rs

  • Member
  • Posts: 3583
Re: door hinges
« Reply #1 on: November 09, 2009, 03:48:50 PM »
The cheapest would be the ones on your Jeep right now, just transfer them over.  Other than that, junkyard.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline zowtiak

  • Member
  • Posts: 40
Re: door hinges
« Reply #2 on: November 09, 2009, 04:23:46 PM »
thought about that initially but i was weary about unbolting them off then on again. My Jeep has been repainted and it looks like it might damage it if I did that. However i did find some on ebay. we will see how it goes in 2 days 12 hours... 
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: door hinges
« Reply #3 on: November 09, 2009, 06:32:07 PM »
Quote from: zowtiak on November 09, 2009, 04:23:46 PM
thought about that initially but i was weary about unbolting them off then on again. My Jeep has been repainted and it looks like it might damage it if I did that. However i did find some on ebay. we will see how it goes in 2 days 12 hours... 
Well, the doors were painted with the hinges on, even stock.  I wouldn't screw with them, unless you're not going to be reusing the doors.  It's a bit of a PITA to get the doors aligned again.  I wouldn't remove the body hinge either.  If you're making custom doors and can weld then you can make your own hinge with a long bolt.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: door hinges
« Reply #4 on: November 09, 2009, 06:42:17 PM »
Quote from: zowtiak on November 09, 2009, 12:13:10 AM
Gotta keep the cost down , so i am going to experiment with some homemade 1/2 doors. Any ideas where to get some hinges on the cheap?

are you making these doors out of aluminum or will they be tube doors? will they have a frame?

a long bolt that you bend at 90degree is a good start - then weld it to a 3/16'' plate 1/2'' wide parallel to the long side of the bolt - drill couple of holes in the plate and your homemade door and put a couple of screws in it. you can also get some 5/16'' bar and bend it in a u shape and if your doors will be tube ones weld one side to the front vertical tube on the door - use a die to create the thread at the end so you can throw a nut on there to avoid the door coming off.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline zowtiak

  • Member
  • Posts: 40
Re: door hinges
« Reply #5 on: November 10, 2009, 06:13:55 AM »
 I think wood is the answer. I will only use them in the summer, and we get 10 inches of rain a year. I will take pics and keep updated. Be a good winter project!
Logged

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: door hinges
« Reply #6 on: November 10, 2009, 07:45:11 AM »
Might still have an extra set laying around.  If not, replacement hinges can be had for $25 a set on ebay most of the time.
Logged
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com
Pages: [1]   Go Up
« previous next »