Author Topic: Power steering pump upgrade and cooler question...  (Read 1526 times)

0 Members and 1 Guest are viewing this topic.

Offline TahoeYJ

  • Member
  • Posts: 530
  • How can I reech theese kids?
Power steering pump upgrade and cooler question...
« on: September 09, 2012, 04:58:02 PM »
My PS pump has been whining for monthssss on end.  I know it's due to be replaced sooner rather than later, so I'm thinking along the lines of something like the PSC pump

http://www.quadratec.com/products/56112_2015.htm

For the price it seems legit. Also, i just put a new radiator in that's equipped with a transmission cooler as well. Since I;m manual, I figure that it would make great use as a cooler for my PS. Only flaw I see is whether or not it would hold up to the pressure of the P/S? On road I don't really see it being an issue- but getting wedged on an obstacle on the trail and having a lot of pressure on the system is what I'm worried about...

Soooo would this possibly work? Or is the only real way to find out to test this out?

Thanks guys  :smokes:
92 YJ. Lifted, 4:88's, 9" rear, 4 wheel disks, some armor, some audio, 35" KM2's, and more

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Power steering pump upgrade and cooler question...
« Reply #1 on: September 09, 2012, 08:02:25 PM »
Also, i just put a new radiator in that's equipped with a transmission cooler as well. Since I;m manual, I figure that it would make great use as a cooler for my PS. Only flaw I see is whether or not it would hold up to the pressure of the P/S?
 
it won't hold up on the pressure side, will explode :lol:

but... you put the cooler on the return where the pressure is zero.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline TahoeYJ

  • Member
  • Posts: 530
  • How can I reech theese kids?
Re: Power steering pump upgrade and cooler question...
« Reply #2 on: September 09, 2012, 08:47:29 PM »
it won't hold up on the pressure side, will explode :lol:

but... you put the cooler on the return where the pressure is zero.
So as long as I run it off the return this will work?
92 YJ. Lifted, 4:88's, 9" rear, 4 wheel disks, some armor, some audio, 35" KM2's, and more

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Power steering pump upgrade and cooler question...
« Reply #3 on: September 09, 2012, 09:47:20 PM »
So as long as I run it off the return this will work?
He's making a joke.  You don't put a cooler on the high-pressure side anyway.  Using the AT cooler has been done before.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Power steering pump upgrade and cooler question...
« Reply #4 on: September 09, 2012, 10:34:47 PM »
So as long as I run it off the return this will work?

yes i was joking, you always run it on the return line.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline TahoeYJ

  • Member
  • Posts: 530
  • How can I reech theese kids?
Re: Power steering pump upgrade and cooler question...
« Reply #5 on: September 10, 2012, 08:09:42 AM »
yes i was joking, you always run it on the return line.
Well I didn't know any better, that's why I asked  :trollface: I didn't think twice about the pressure.

I did email PSC though just to get some input from them, and they already responded saying it wouldn't be beneficial because it'd actually be heating up the fluid because of the coolant temps being so high?  :confused: seems like if it did, then it'd be pointless to even have an a/t tranny plumbed to it?
92 YJ. Lifted, 4:88's, 9" rear, 4 wheel disks, some armor, some audio, 35" KM2's, and more

Offline neale_rs

  • Member
  • Posts: 3583
Re: Power steering pump upgrade and cooler question...
« Reply #6 on: September 10, 2012, 08:15:39 AM »
 It all depends on what the normal operating temperatures are.   Maybe the PS is usually cooler than the engine coolant and just overheats with certain types of use and the  automatic transmission is normally hotter than the engine coolant.   Anybody know the normal operating temperatures?

'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline neale_rs

  • Member
  • Posts: 3583
Re: Power steering pump upgrade and cooler question...
« Reply #7 on: September 10, 2012, 08:23:31 AM »
Found this on PS temperatures:  http://www.pirate4x4.com/forum/showthread.php?t=596730 

Found this on transmission temperatures:  http://www.digi-panel.com/trannyoil.htm

It's hard to say, it depends on how hot the engine coolant is at the bottom of the radiator...  Just guessing it looks like it would provide almost no cooling under normal conditions but would help when the PS is being used hard (eliminate the extremes).

'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch