« previous next »
Pages: [1]   Go Down

Author Topic: Oil filter relocation  (Read 1604 times)

0 Members and 2 Guests are viewing this topic.

ballast

  • Guest
Oil filter relocation
« on: April 22, 2006, 05:34:50 PM »
I plan on relocating my oil filter.  Anybody else already done this and like the kit they have?  Just trying to get specifics and actual part numbers :)  

Thanks!
Logged

Erik

  • Guest
Oil filter relocation
« Reply #1 on: April 22, 2006, 07:01:25 PM »
www.summitracing.com

used their kits on a few vehicles but i really don't know why you'd want to relocate it on a jeep... especially if you have the 2.5 since its so easy to get to..
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Oil filter relocation
« Reply #2 on: April 22, 2006, 08:03:52 PM »
There are a bunch of universal kits out there.  I know a few people who use them.  The 2.5L's location isn't that bad but with a remote unit, you could run a cooler and have the filter someplace where it can be removed without spilling oil onto the starter.  :lol:   I'd also suggest running a larger filter then the PH16.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

ballast

  • Guest
Oil filter relocation
« Reply #3 on: April 22, 2006, 10:48:10 PM »
I didnt mind spilling a couple drops when I had an appartment but with what I spent on my house, I think I'd rather relocate the filter and keep the wife off my butt.  I may even mount it inverted so leaking isnt an option again.  

The problem with Summit racing is I cant figure out if their kits fit or dont.  Maybe I should call them...
Logged

Erik

  • Guest
Oil filter relocation
« Reply #4 on: April 22, 2006, 11:25:35 PM »
cardboard man...  :D  or change the oil in the grass like me.  honestly, if that's the whole reason you are wanting the reloaction kit.... i wouldn't.

when i get a little oil on the driveway i roll out my 12hp commercial duty pressure washer and blast it to smitherines!
Logged

ballast

  • Guest
Oil filter relocation
« Reply #5 on: April 23, 2006, 12:13:09 AM »
Good ideas but I definately spend too much effort on my yard to kill it with some oil!  I also have the added benefit of working night shift ie. 6PM to 6AM so I am 1000 times more likely to change my oil at 2or 3AM on a night I am off than at noon on any day of the week.  With the added bonus of 2 children under the age of 16months, I dont get a very big surplus of time to do any amount of prework/post cleanup.  Top all of that off with 8 credits of school each semister and I am down to about 30 seconds per week to work on the Jeep.  

For the final straw, when my wife and I met, we both had Wranglers, I the mighty 6cyl-manual, she the 4cyl-auto (I didnt even know they made a 4cyl auto!).  My dumb arse traded in mine for the Maza sport wagon that she always drives and I am left with the 4 poper, since I do not have the equipment or time (much less being without the Jeep) available for a engine swap, Im prepping her for some form of forced induction, until then, I want a relocated oil filter!

Thanks all for the help :)
Logged
Pages: [1]   Go Up
« previous next »