« previous next »
Pages: [1]   Go Down

Author Topic: seized up grease points  (Read 1322 times)

0 Members and 1 Guest are viewing this topic.

Jeep4banger97

  • Guest
seized up grease points
« on: August 13, 2006, 05:20:49 PM »
I have grease points on my lower control arms, and they arent taking grease, can i replace just the points or do i have to replace the whole lower portion?
Logged

Guardian7

  • Guest
seized up grease points
« Reply #1 on: August 13, 2006, 06:23:13 PM »
Try replacing the grease fittings first, they should screw out with a small socket or wrench.
Logged

Jesse-James

  • Guest
seized up grease points
« Reply #2 on: August 13, 2006, 06:27:27 PM »
On the fitting see if you can take center punch and tap lightly with a hammer to free up the ball in the center. A lot of times it will just be stuck closed.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
seized up grease points
« Reply #3 on: August 13, 2006, 07:21:00 PM »
Or else get a needle tip.  The grease fittings official name are Zerk Fittings.  You can pick up a new one for cheap also.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Jeep4banger97

  • Guest
seized up grease points
« Reply #4 on: August 13, 2006, 09:57:36 PM »
thanks alot guys, it was starting to squeak a little i dont want it to get any worse! thanks ill try what you said and get back to u!
Logged

Jeep4banger97

  • Guest
seized up grease points
« Reply #5 on: August 15, 2006, 02:28:38 PM »
yea i ended up replacing the little buggers, yea they were seized completely thanks for your help guys!
Logged
Pages: [1]   Go Up
« previous next »