Author Topic: MALLORY CDI Ignition  (Read 1712 times)

0 Members and 1 Guest are viewing this topic.

binerypir8

  • Guest
MALLORY CDI Ignition
« on: January 23, 2006, 02:04:34 PM »
has anybody had any luck installing the Mallory Hyfire 685VI Ignition Controller?  I cant figure out how its supposed to be hooked up on my 95 YJ and all the schematics are for every other vehicle but the jeeps.... Anyone??

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
MALLORY CDI Ignition
« Reply #1 on: January 23, 2006, 02:49:32 PM »
Can you scan or take a pict of the schematic?
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

binerypir8

  • Guest
MALLORY CDI Ignition
« Reply #2 on: January 24, 2006, 12:35:14 PM »
Heres the link to the directions from Mr. Gasket's Website

http://go.mrgasket.com/pdf/685_6851.pdf

I've looked around for a while i cant find anybody else thats installed one of these on a yj

Thanx

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
MALLORY CDI Ignition
« Reply #3 on: January 24, 2006, 01:23:46 PM »
Wow, that thing wants to splice into everything.  :shock: You're going to have to make Y connectors for the MAP.  I suspect that it's most similar to the MOPAR setup.

I looks like it's designed to be a stand alone system which is ok but your PCM wants to know what everything is doing also.  So you'll need to have both hooked up.  I suspect this is one of the main reasons no one runs one on a newer Jeep.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."