Author Topic: Dana 35 woes  (Read 1324 times)

0 Members and 2 Guests are viewing this topic.

RT

  • Guest
Dana 35 woes
« on: August 27, 2010, 11:54:28 PM »
so i just had my rear diff rebuilt and now instead of a grinding howl at above 20 miles per hour I get this weird ghostly whine while accel and floating but not while decel. If you don't mind me asking, wtf is this *%*@

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Dana 35 woes
« Reply #1 on: August 28, 2010, 01:40:45 AM »
Sounds like maybe an incorrect gear mesh setup.  Who did the gear install?

Torch_Ind

  • Guest
Re: Dana 35 woes
« Reply #2 on: August 28, 2010, 06:50:47 AM »
Sounds like maybe an incorrect gear mesh setup.  Who did the gear install?

+1

are they new gears?
did you do it your self?
do you know how to check tooth contact pattern?
« Last Edit: August 28, 2010, 06:56:03 AM by Torch_Ind »

RT

  • Guest
Re: Dana 35 woes
« Reply #3 on: August 28, 2010, 09:34:56 AM »
wheel align it alb did it...they said I shouldn't worry about it, but it's extremely annoying...i was going to take it to 4 wheel parts and have them check it out.

RT

  • Guest
Re: Dana 35 woes
« Reply #4 on: August 28, 2010, 09:36:51 AM »
I have new spider gears, and I can't remember what the things called...it's what the spider gears are housed in and the ring gears bolted to

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Dana 35 woes
« Reply #5 on: August 28, 2010, 09:51:27 AM »
I have new spider gears, and I can't remember what the things called...it's what the spider gears are housed in and the ring gears bolted to

Carrier.
There shouldn't be much if any noise. Something sounds messed up.
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Clem

  • Guest
Re: Dana 35 woes
« Reply #6 on: August 28, 2010, 03:51:44 PM »
wheel align it alb did it...they said I shouldn't worry about it, but it's extremely annoying...i was going to take it to 4 wheel parts and have them check it out.


If you are in Albuquerue, pm me. It coulb someting stupid like low gear oil if it was just rebuilt...

RT

  • Guest
Re: Dana 35 woes
« Reply #7 on: August 28, 2010, 05:01:57 PM »
Redline mt-90 should I put it in my tranny or no? Is the GL5 really that bad for my brass sinchros, will I be helping things out or will I just make things worse with the redline

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Dana 35 woes
« Reply #8 on: August 28, 2010, 05:18:19 PM »
Redline mt-90 should I put it in my tranny or no? Is the GL5 really that bad for my brass sinchros, will I be helping things out or will I just make things worse with the redline


That is what I put in mine. So far so good.
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Torch_Ind

  • Guest
Re: Dana 35 woes
« Reply #9 on: August 28, 2010, 08:55:22 PM »
the only other thing other then gears making the noise to me is you have one flat tire and it's making the spiders spin fast but other then that I honestly think it's your ring and pinion making noise. you may have bad wear on it from whatever went before that you had repaired.

RT

  • Guest
Re: Dana 35 woes
« Reply #10 on: August 29, 2010, 12:24:34 AM »
it went into the shop for fried spiders, came out ok but the carrier was walled out, put a new one in....suddenly makes tranny noise...I check the tranny fluid, it's way light and runy. Which is funny because I checked it before it went in and it was fine. I think I must be dealing with a crooked shop  ???  But anywho, it drives great and the diff that they worked on isn't getting hot at all...