« previous next »
Pages: [1] 2   Go Down

Author Topic: aFe Headers?  (Read 1554 times)

0 Members and 2 Guests are viewing this topic.

Wheezer

  • Guest
aFe Headers?
« on: September 27, 2014, 01:37:37 PM »
So, my piece of crab Borla header has finally cracked. I say piece of crap because the thing has not fit since day one, Borla's response to repeated requests for assistance/advice was to block my phone number, they will not return my calls or emails. Replacing the header isn't going to happen, I wouldn't put another Borla on even if they did honor the warranty. I had for a long time thought that Banks was the way to go but it seems they have cracking issues as well. Now I see that aFe offers a header for the 2.5L. Has anyone here had any experience with aFe? I am assuming that their header is CARB certified. Thanks!

Wheezer
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: aFe Headers?
« Reply #1 on: September 27, 2014, 02:57:16 PM »
link?
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: aFe Headers?
« Reply #2 on: September 27, 2014, 04:06:47 PM »
http://afepower.com/shop/details_new.php?partno=48-46206&filter&menu=gas&engine=2.5L&searchtype=vehicle&make=Jeep&model=Wrangler&year=1992&engine=2.5L&&brandID=99

Note: This header is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

If you have a CARB sticker for your Borla, that might be enough to trick them.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Wheezer

  • Guest
Re: aFe Headers?
« Reply #3 on: September 27, 2014, 04:24:33 PM »
 Yeah, I finally got around to looking it up, very disappointing. I messaged them to ask if CARB exemption was in the works. Nothing yet.

Wheezer
« Last Edit: September 27, 2014, 04:25:29 PM by Wheezer »
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: aFe Headers?
« Reply #4 on: September 27, 2014, 10:39:39 PM »
looks good
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: aFe Headers?
« Reply #5 on: September 28, 2014, 01:22:37 PM »
Quote from: Wheezer on September 27, 2014, 04:24:33 PM
Yeah, I finally got around to looking it up, very disappointing. I messaged them to ask if CARB exemption was in the works. Nothing yet.

Wheezer
If you have a Borla CARB sticker you will probably be okay with the AFE since they usually just look to see if you have the sticker.  You might remove the AFE plate that tacked onto the tube but that probably wouldn't be an issue.

Or else wait and see if AFE will pay for CARB exemption.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Wheezer

  • Guest
Re: aFe Headers?
« Reply #6 on: October 01, 2014, 11:30:28 AM »
The CARB "sticker" is a badge tack welded onto one of the tubes. I could probably get it off of the Borla unit, I could then see if it could be tacked onto the aFe header. Right now I am waiting to see if aFe is going to get CARB exemption, then again I am looking into leaving this godforsaken state in the not too distant future. I may wait until then to rebuild my exhaust system. I should tell y'all what I went through to get a cat for my son's Jeep ('98 TJ Sport). They require you to have one but not to make one available to you. How is that supposed to work?

Wheezer
Logged

Offline jfrabat

  • Gargantuan Mango Tree MechanicŪ
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: aFe Headers?
« Reply #7 on: October 01, 2014, 01:44:28 PM »
One of the reasons I decided NOT to import the Jeep to Costa Rica when I lived there (other than the high cost of importing it!) was that then the Jeep would have to pass emissions testing; since I do not have a cat, that would have probably shown up in the test!  But I have to say, that heather looks mighty attractive!
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline lsmurphy

  • Member
  • Posts: 24
Re: aFe Headers?
« Reply #8 on: November 02, 2014, 08:54:57 PM »




It'll be a few weeks before I get the engine installed, so far so good.
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: aFe Headers?
« Reply #9 on: November 08, 2014, 12:35:03 PM »
looks really pretty
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline chardrc

  • Member
  • Posts: 3535
Re: aFe Headers?
« Reply #10 on: November 11, 2014, 07:08:25 PM »
thats a real sharp looking blue. hope its runs as good as it looks
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: aFe Headers?
« Reply #11 on: November 12, 2014, 01:38:41 PM »
Looks like Pontiac blue.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline lsmurphy

  • Member
  • Posts: 24
Re: aFe Headers?
« Reply #12 on: November 14, 2014, 05:43:14 AM »
Thanks guys.

It's '68 Chrysler metallic blue.........I do like to keep it in the family. :P
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: aFe Headers?
« Reply #13 on: November 14, 2014, 12:49:11 PM »
That's Mopar Teal?
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline dasbulliwagen

  • Member
  • Posts: 16
Re: aFe Headers?
« Reply #14 on: January 15, 2015, 05:34:46 PM »
Im getting ready to pull the trigger on one of these. Hopefully I wont have the issues that people have been seeing with the Borlas. Ive shopped it on Google and found a place selling for $335 with no tax and free shipping. Its the best price Ive seen yet, as the price on aFe's website went up since the last time I looked at it late last year. Ill be calling tommorow to get it coming.
Logged
Pages: [1] 2   Go Up
« previous next »