« previous next »
Pages: [1]   Go Down

Author Topic: DIY advance adapters slip yoke eliminator....  (Read 1788 times)

0 Members and 1 Guest are viewing this topic.

j-freak153

  • Guest
DIY advance adapters slip yoke eliminator....
« on: July 12, 2006, 07:38:50 PM »
anyone ever done this before at home? i have my 8.8 coming, the SYE kit, and the CV driveshaft...and im planning on doing the SYE by myself....anyone have any experience doing this?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
DIY advance adapters slip yoke eliminator....
« Reply #1 on: July 12, 2006, 09:01:07 PM »
There really isn't much to it.  Measure twice, cut once.  Then drill and tap.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

j-freak153

  • Guest
DIY advance adapters slip yoke eliminator....
« Reply #2 on: July 13, 2006, 07:11:08 AM »
not the drill and tap one...the heavy duty one...
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
DIY advance adapters slip yoke eliminator....
« Reply #3 on: July 13, 2006, 11:02:18 AM »
Quote from: "j-freak153"
not the drill and tap one...the heavy duty one...


Well, those are easier in that you don't have to do any cutting or drilling.  You just need a good pair of C ring plyers.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

j-freak153

  • Guest
DIY advance adapters slip yoke eliminator....
« Reply #4 on: July 13, 2006, 08:29:53 PM »
good to hear...
Logged

j-freak153

  • Guest
DIY advance adapters slip yoke eliminator....
« Reply #5 on: July 15, 2006, 06:26:38 PM »
guess not too many people have done them by themselves...by the reaction to this topic....
Logged

YJmechanic

  • Guest
DIY advance adapters slip yoke eliminator....
« Reply #6 on: July 17, 2006, 03:53:16 PM »
I'm doing the exact same thing to my yj soon.  I am redoing the 8.8 now and then after it is built I'll go to the sye and cv but from what I understand it is not a hard thing just time and watching how it comes apart and reassemble.  I work at a dealership but I will still just take it apart and put it together the same way pending instructions from the kit.  tcases are pretty simple designs just take it slow and let me know how it turns out.  I'm sure with my schedule you'll have yours done first.
Logged

Offline supryj4

  • Member
  • Posts: 70
DIY advance adapters slip yoke eliminator....
« Reply #7 on: July 17, 2006, 07:13:15 PM »
I did one in my garage it was pretty staight forward.I did the JB conversions super shot kit its about 2" or so shorter than the normal SYE
kit and If you have a electronic signal driven speedo insted of cable driven JB also has a adjustble speed recalibrator that woorks real well and you can recalibrate at any time for regearing or tires size changes and I think I only paid $50 for it.good luck
Logged
90 YJ 2.5L MPI 33 MTRs on 15x10 US indy mags
F/super 30 ARB R/currie 44 ARB 4:88s
Pages: [1]   Go Up
« previous next »