Author Topic: *** Introduce yourself here! ***  (Read 332684 times)

0 Members and 3 Guests are viewing this topic.

jeeper78

  • Guest
Re: *** Introduce yourself here! ***
« Reply #750 on: January 05, 2009, 08:16:13 PM »
Hey guys. I always wanted a jeep and if it wasn't for getting a dui in a civic si a year ago, I might not have gotten rid of the cop attracting civ and gotten my wrang. That dui was a blessing in disguise. I live near norristown, Pa and I'm looking for wheeling spots. If anybody here lives near me -- let me know. Thanks

jaywiz1977

  • Guest
Re: *** Introduce yourself here! ***
« Reply #751 on: January 05, 2009, 08:18:28 PM »
hello my name is jay,i'm 32 and i am now a jeepaholic. just got my first wrangler for xmas and all i can say is...why the h#ll didn't i do this b4? anyway it's a 95 yj with the 2.5L and the guy i bought it from gave me a hard top and full doors to boot!!

rubberducky

  • Guest
Re: *** Introduce yourself here! ***
« Reply #752 on: January 06, 2009, 12:32:11 PM »
Whats going on. I'm Jamie a Senior doen here at Texas A&M in Galveston, ya ya let the jokes start. I've had my tj since Aug 05. First owner, DD, about to roll over 100k. minor power mods, plus lift. two sets of tires, 29,s and some 33s. with the street tires i get about 16-17 mpg doinh close to 80 mph depending on head wind. I've got a CB, and a removable speaker system which is great for land parties, and I always pull loads that my tj should not. 25 50lb feed sacks, round bails of hay. this jeep replaced my 3/4 ton suburban so i improvise. It has had three trannys put in. all blanked up from the factory. Which was almost a lawsuit, Thanks Jeep.  anywho i just found this site and figured why not. No matter how many problems I've had i still love this little Jeep.

Redneckrockcrawler

  • Guest
Re: *** Introduce yourself here! ***
« Reply #753 on: January 06, 2009, 02:16:51 PM »
Howdy Everyone. I'm Scott from N. Ga. I have been wheelin with my 92 yj for a few years now.I bought it bone stock and have fabricated and installed all the mods myself. I would like to compliment on this site, Its  GREAT..................

islwayn

  • Guest
Re: *** Introduce yourself here! ***
« Reply #754 on: January 06, 2009, 04:33:42 PM »
ok.. well, got into 4 wheeling a long time ago, my dad always had some sort of jeep, willy's, jeep pickup, and so on.. so, the natural thing for me was a CJ..  my last CJ was a 79 that I put everything into..  360 hi po AMX motor with a turbo, t98 trans, lockers, burbank suspension, guards, warn winch, full cage, etc..  nice rig..  different that todays jeeps for sure,.. anyway, I just bought a 93 Wrangler Renegad 2.5L..  whoa, what a difference, I need to do a lot to this thing for sure..  so...  you experienced folks out there, the question is, what, where, etc..  I'm in the Las Vegas area if anyone is down around here.. love to prospect.. or get together to work on these things.. thinking of buying a tig/mig, bender, and a few things.. need a 2" tube tow bar like they used to make, will make my own if I can't find one... soon...   so, other than that, I live in WAshington state above Spokane during the summer months..  its warmer then..  wayne...

islwayn

  • Guest
Re: *** Introduce yourself here! ***
« Reply #755 on: January 07, 2009, 07:30:04 AM »
sorry, blew that, I really am getting old.. it was a 401 AMX HiPerf motor that I put in the CJ..  drops right in the spot of the 304..  islwayn

Chad M.

  • Guest
Re: *** Introduce yourself here! ***
« Reply #756 on: January 08, 2009, 12:15:42 AM »
ok guys i just signed up bucause my buddy bill just asked me to i didnt know about this website. but i bought my jeep in the middle of summer when gas was 4 dollars a gallon and it was killing me to drive my f250 with the big block 460. when i found my jeep i had to have it so i bought it. it is a 1990 wrangler with a 4 inch lift 32 inch tires off road bumpers 9500 pound winch and i want to ad more ill get pics on soon

Bill M.

  • Guest
Re: *** Introduce yourself here! ***
« Reply #757 on: January 08, 2009, 11:33:35 AM »
Yup.. He's my pal  :ghey:

JK... but he's a great guy. He's helped me a lot with my Jeep and hes a damn good fabricator. Help him out and let's give Chad a good ol Jeep Forum Welcome....

 :ass:

TrailsLessTaken

  • Guest
Re: *** Introduce yourself here! ***
« Reply #758 on: January 08, 2009, 11:52:45 AM »
Welcome Chad :beers:

rubberducky

  • Guest
Re: *** Introduce yourself here! ***
« Reply #759 on: January 08, 2009, 04:33:59 PM »
Howdy Chad.

JeffsJeep

  • Guest
Re: *** Introduce yourself here! ***
« Reply #760 on: January 08, 2009, 06:53:35 PM »
Whats going on. I'm Jamie a Senior doen here at Texas A&M in Galveston, ya ya let the jokes start. I've had my tj since Aug 05. First owner, DD, about to roll over 100k. minor power mods, plus lift. two sets of tires, 29,s and some 33s. with the street tires i get about 16-17 mpg doinh close to 80 mph depending on head wind. I've got a CB, and a removable speaker system which is great for land parties, and I always pull loads that my tj should not. 25 50lb feed sacks, round bails of hay. this jeep replaced my 3/4 ton suburban so i improvise. It has had three trannys put in. all blanked up from the factory. Which was almost a lawsuit, Thanks Jeep.  anywho i just found this site and figured why not. No matter how many problems I've had i still love this little Jeep.

And you wonder why youve gone through 3 trannys??? Look at what you haul!

Anyway, welcome Jamie, and welcome Chadwick, lol.

rubberducky

  • Guest
Re: *** Introduce yourself here! ***
« Reply #761 on: January 08, 2009, 09:52:49 PM »
Well I've hauled more, and when i could only do like forty, and then 15 on a big bridge i decided not to do that again. Dumb call on my part i know. the tailor alone weighed about a grand that should have been my sign. lol

Willys Off-Road

  • Guest
Re: *** Introduce yourself here! ***
« Reply #762 on: January 10, 2009, 08:49:04 PM »
My name is Rob Wolfe and I own Willys Off-Road Supply out of Roca NE, just 4 miles from the SW corner of Lincoln NE.  We are a small mom & pop Willys/Jeep junkyard catering to the flat fender era vehicles.  We also sell new parts and accessories for all Willys & Jeep vehicles and many other off road vehicles including ATVs.  If you have a 27-88 Chevy or Ford that you need floor, firewall, trunk, or wheel wells for, we can also get those for you.  I own a 49 Jeepster, 49 CJ3A, a 62 Wagon on a 74 Chevy frame and running gear and an 86 Grand Wagoneer.  The junk yard  currently has 30 vehicles, no Wranglers or CJs right now.  Our sales site is http://www.willysoffroadsupply.com  The Jeepster was my first car and only has 88,000 on it.  I am the 3rd owner.   I got the 3A last year and haven't had time to do the little things to it to get it running.  The wagon has been an ongoing project for a few years and will soon become a pickup instead of a wagon so that I can title it here in NE.  The GW is my daily driver and tow vehicle but is tired and rusty at 124,000 miles.  It has been rode hard and the PO didn't bother putting it up let alone putting it up wet.  Hope to have the 3A and wagon now PU project running by this summer so I can go have fun.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: *** Introduce yourself here! ***
« Reply #763 on: January 10, 2009, 10:48:39 PM »
Welcome Rob and everyone else who joined over the holiday!
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Spicey_Mac98

  • Guest
Re: *** Introduce yourself here! ***
« Reply #764 on: January 11, 2009, 12:21:34 PM »
Hey guys, been a jeep fan since i was in highschool. I finally got my hands on one in 05. It was a bone stock 98 TJ. While I was deployed to Iraq from Nov 06-Feb 08 my wife suprised me with a 2 inch  BDS lift and Procomp wheels and tires. Now I'm going to recam and change the gears this summer.