Author Topic: Lesson of the day, un mounting tires by hand  (Read 1135 times)

0 Members and 2 Guests are viewing this topic.

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Lesson of the day, un mounting tires by hand
« on: February 16, 2007, 09:39:55 AM »
My dd is a Kia Spectra 5, so shoving 4 rims with tires in it is a pain.  I've put tires on by hand before, but never tried removing them.   Couple lessons I learned while doing it.

Tire #1  30 minutes - It's a lot easier if you cut all around the sidewall on the outside if you are tossing the tires anyway.  Break the beads by putting a highlift on it and jack up the jeep. 

Tire #2  20 minutes - spraying some wd40 on the beads makes it a heck of a lot easier to pull the tires off the wheel

Tire #3  15 minutes - tires seem to come off better at 60 degrees than they do at 30 degrees ;)

Tire #4  15 minutes - didn't learn anything here except that it's a whole lot of work to save $5 a tire at the local garage.
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Greatwhite

  • Guest
Re: Lesson of the day, un mounting tires by hand
« Reply #1 on: February 16, 2007, 10:00:01 AM »
I have to agree with you alot of work to save 20 bucks  :smile: but a little experience never hurt nobody  :thumbsup:

Offline aw12345

  • Member
  • Posts: 3065
    • my jeep picture page
Re: Lesson of the day, un mounting tires by hand
« Reply #2 on: February 16, 2007, 10:38:53 AM »
Just come by my house lol will throw them on my tire machine. makes easy work of it. Sometimes left over stuff from having a repair shop comes in handy lol

Art
2006 Jeep Wrangler TJ SE
2004 Jeep Wrangler TJ SE

Offline neale_rs

  • Member
  • Posts: 3583
Re: Lesson of the day, un mounting tires by hand
« Reply #3 on: February 16, 2007, 12:18:38 PM »
There's an old tire repair shop near where I live where they remove and mount by hand.  They do this all day long and they can do it about as fast as a machine using levers and big rubber hammers!  They break the bead using a lever device that looks like they built themselves.

'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Lesson of the day, un mounting tires by hand
« Reply #4 on: February 16, 2007, 12:29:21 PM »
There's an old tire repair shop near where I live where they remove and mount by hand.  They do this all day long and they can do it about as fast as a machine using levers and big rubber hammers!  They break the bead using a lever device that looks like they built themselves.

You'ld get some big arms doing that every day. 
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Lesson of the day, un mounting tires by hand
« Reply #5 on: February 16, 2007, 02:33:59 PM »
I used to mount and remove tires back in HS on a manual rig.  Basically a platform with some adapter cones and a couple long bars.  It was slow and took a lot of effort not to mention you risk scratching the rim of the wheel.

When I have tires to dismount, I take them to the service station where they have the automatic tire machine and for $20 all 4 are dismounted.  Well worth the $20.  Although, being able to take a tire off in the field is a good skill to learn.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Tall Boy

  • Guest
Re: Lesson of the day, un mounting tires by hand
« Reply #6 on: February 19, 2007, 11:48:49 AM »
I just did my motorcycle tires, I forgot to overfill them with air to set the bead and rode around town looking like a fool for two days.  :popcorn: