Topic: D44

[jcsanders79]

Anyone know if all D44 carriers fit all D44.  I have to upgrade to a carrier that accepts 4.10 or numerically higher gears and have seen several on Ebay but am not sure if they will work with the TJ D44.

[Jeffy]

Anyone know if all D44 carriers fit all D44.  I have to upgrade to a carrier that accepts 4.10 or numerically higher gears and have seen several on Ebay but am not sure if they will work with the TJ D44.

As long as it's not for a Rubicon, it should be fine.

[oldjeep]

Yup, carriers are the same on 44's for both high and low pinion axles except for the Rubicon (wanna be 44) carrier

[Jeffy]

Yup, carriers are the same on 44's for both high and low pinion axles except for the Rubicon (wanna be 44) carrier

Well, I wouldn't say it's a wannabe since they are standard carries but they don't use a gear split.

[oldjeep]

I call it that because it's a Dana 44/Dana 30 hybrid.  So you get the bigger ring gear but not the stronger balljoints or locking hubs.

[Jeffy]

I call it that because it's a Dana 44/Dana 30 hybrid.  So you get the bigger ring gear but not the stronger balljoints or locking hubs.

Ah, I was referring to the carrier only.