« previous next »
Pages: [1]   Go Down

Author Topic: AX5 TJ -> YJ  (Read 2077 times)

0 Members and 2 Guests are viewing this topic.

Cyborg

  • Guest
AX5 TJ -> YJ
« on: September 18, 2008, 07:00:23 AM »
hey guys, just wondering if the AX5 from a 98 TJ will bolt in place of a 95 YJ?
I am thinking they will, just wanted some backup before I go ahead and buy the tranny.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: AX5 TJ -> YJ
« Reply #1 on: September 18, 2008, 11:42:27 AM »
Quote from: Cyborg on September 18, 2008, 07:00:23 AM
hey guys, just wondering if the AX5 from a 98 TJ will bolt in place of a 95 YJ?
I am thinking they will, just wanted some backup before I go ahead and buy the tranny.

Yes, and it would make a better choice then to rebuild the old transmission.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Cyborg

  • Guest
Re: AX5 TJ -> YJ
« Reply #2 on: September 18, 2008, 05:23:33 PM »
is this for a strength difference between the 2 tranny's, or simply because of cost?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: AX5 TJ -> YJ
« Reply #3 on: September 18, 2008, 07:29:18 PM »
Quote from: Cyborg on September 18, 2008, 05:23:33 PM
is this for a strength difference between the 2 tranny's, or simply because of cost?

Rebuilt AX's don't seem to last as long and for the price of a rebuilt you can have a low mileage salvage.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: AX5 TJ -> YJ
« Reply #4 on: September 18, 2008, 07:49:34 PM »
No strength difference, and should bolt right in.
Logged

Cyborg

  • Guest
Re: AX5 TJ -> YJ
« Reply #5 on: September 18, 2008, 08:31:59 PM »
thanks everyone.
I kinda ruled out the rebuild already. Local shop quoted around $1000 if I take tranny out (and providing the problem is what I described).
Logged

cmgorman94

  • Guest
Re: AX5 TJ -> YJ
« Reply #6 on: September 20, 2008, 07:21:14 PM »
You will have use your YJ bell housing and slave cylinder, but they will bolt right up.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: AX5 TJ -> YJ
« Reply #7 on: September 20, 2008, 11:44:59 PM »
Quote from: cmgorman94 on September 20, 2008, 07:21:14 PM
You will have use your YJ bell housing and slave cylinder, but they will bolt right up.

Why?  ???
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: AX5 TJ -> YJ
« Reply #8 on: April 27, 2012, 11:46:46 AM »
This thread has been dead for a long time but I'll add this anyway:

Got the AX5 rebuilt about 6 years ago and it is doing fine (drive only about 1200 miles per year). The cost was about $400 at a local transmission shop.

Recently bought a TJ AX5 in good working condition (just to have as a spare) for $150. 

It's pretty clear which is the better deal even with the low cost rebuilds available here in Mexico.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch
Pages: [1]   Go Up
« previous next »