« previous next »
Pages: 1 [2] 3   Go Down

Author Topic: Steering Parts  (Read 3316 times)

0 Members and 3 Guests are viewing this topic.

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Steering Parts
« Reply #15 on: October 03, 2008, 05:53:51 PM »
Quote from: Mozman68 on October 03, 2008, 05:43:25 PM
nope...considering where it is and how strong it is, the chances of failure seem pretty low.....and I'm just a poseur anyway... :wave:

How strong what is?  Those TRE's they use are the same thing used on 1/2 ton chevys' from the 70's.
Logged
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Steering Parts
« Reply #16 on: October 03, 2008, 06:23:13 PM »
Quote from: oldjeep on October 03, 2008, 04:43:52 PM
Do you carry an extra passenger side TRE on the trail?  One of the 2 problems I've got with the JCR stuff is that they modify an off the shelf TRE for their kit.
Mine is the same way, from PartsMike.  Reverse reamed stabilizer hole.
Logged

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: Steering Parts
« Reply #17 on: October 04, 2008, 05:08:23 AM »
Quote from: Bounty Hunter on October 03, 2008, 06:23:13 PM
Mine is the same way, from PartsMike.  Reverse reamed stabilizer hole.

That's where JCR gets theirs......
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: Steering Parts
« Reply #18 on: October 04, 2008, 05:09:34 AM »
Quote from: oldjeep on October 03, 2008, 05:53:51 PM
How strong what is?  Those TRE's they use are the same thing used on 1/2 ton chevys' from the 70's.

They were used in 3/4 ton as well.  More than enough considering the geometry of their steering and the other parts used.
Logged
2009 Audi S5....what....its 4wd...sort of....

Oilsmoke

  • Guest
Re: Steering Parts
« Reply #19 on: October 04, 2008, 06:34:01 PM »
Well  I have to Work this weekend So i was in a hurry and I ordered the Stock parts just 30  minutess before Jeffy Posted the Info. I wanted the Rugged Ridge Setup. So I tried to cancel my Order and they Had it Shipped out of Denver. Damm that was fast.  I sure it will cost me shipping back so I quess I am Stuck with it.  :mad: It should be here Monday Though.

Thanks Guys for are the Great Imput. I wish I could of used it.
Logged

Oilsmoke

  • Guest
Re: Steering Parts
« Reply #20 on: October 07, 2008, 07:42:01 PM »
Stock long TRE and small end Install So the loosenest Is gone and I will install the drag link this friday when i am Off work.
The Stock replacement parts will work Great for My Needs. nice to feel a tight one agian. :hitit:
Logged

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Steering Parts
« Reply #21 on: October 08, 2008, 09:46:20 AM »
There's a pair of WJ knuckles on a local board for $100 if anybody is looking to highsteer a d30.
Logged

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Steering Parts
« Reply #22 on: October 08, 2008, 10:22:31 AM »
Quote from: Bounty Hunter on October 08, 2008, 09:46:20 AM
There's a pair of WJ knuckles on a local board for $100 if anybody is looking to highsteer a d30.
Once you do all the custom work isn't it cheaper to just buy the teraflex knuckle that just bolts on?
Logged
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline neale_rs

  • Member
  • Posts: 3583
Re: Steering Parts
« Reply #23 on: October 08, 2008, 12:30:45 PM »
Does the WJ knuckle raise the tie bar and drag link or just the drag link?  I recently saw that Teraflex offers a tie rod flip kit also that will raise the tie rod but I don't think it would work with an SOA (for those who have SOA in front).
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Steering Parts
« Reply #24 on: October 08, 2008, 12:53:48 PM »
It raises the drag-link.  Although you can retap the knuckles so you can then mount the tie-rod ontop of the knuckles.  Which may or may not interfere with the leaf pack on a SOA.
« Last Edit: October 08, 2008, 12:54:41 PM by Jeffy »
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: Steering Parts
« Reply #25 on: October 08, 2008, 01:14:32 PM »
For an SUA jeep (YJ) it almost seems better (simplicity and cost) to just do the flip and continue to use an inverted T steering setup.  On my YJ it looks like it would be a tight fit with the wheel, I keep thinking 16" rims might be needed.




Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Steering Parts
« Reply #26 on: October 08, 2008, 01:31:12 PM »
Quote from: neale_rs on October 08, 2008, 01:14:32 PM
For an SUA jeep (YJ) it almost seems better (simplicity and cost) to just do the flip and continue to use an inverted T steering setup.  On my YJ it looks like it would be a tight fit with the wheel, I keep thinking 16" rims might be needed.

IIRC, if you want to do the whole WJ swap with the two pot brakes, then going with larger wheels might not be a bad idea.  17" seem to be more common with the more extreme rockcrawlers out here.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: Steering Parts
« Reply #27 on: October 08, 2008, 01:44:28 PM »
These are good projects.  Thanks for the ideas.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: Steering Parts
« Reply #28 on: October 08, 2008, 02:06:47 PM »
Quote from: Jeffy on October 08, 2008, 01:31:12 PM
17" seem to be more common with the more extreme rockcrawlers out here.

True...that's why I run 17's.....



 :whistle:

Logged
2009 Audi S5....what....its 4wd...sort of....

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Steering Parts
« Reply #29 on: October 08, 2008, 03:00:23 PM »
Quote from: Mozman68 on October 08, 2008, 02:06:47 PM
True...that's why I run 17's.....



 :whistle:



I thought you did it so you could add spinners later on... :stick: :guns:
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost
Pages: 1 [2] 3   Go Up
« previous next »