« previous next »
Pages: [1]   Go Down

Author Topic: Changing cams  (Read 1121 times)

0 Members and 5 Guests are viewing this topic.

Offline jfrabat

  • Gargantuan Mango Tree MechanicŪ
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Changing cams
« on: March 24, 2009, 05:25:11 PM »
OK, guys, I got a new .450 lift 256 duration Mopar High Performance camshaft with tappets and new Mopar Performance springs (spring retainers are already ordered, but have yet to arrive).  My question is, without taking the engine out of the Jeep, do I need to take out the radiator and AC condenser to change the cam?  Do you think I could pull out and replace the cams with the radiator in place?  I am being lazy, so I dont want to drop the radiator if I can get away with it...
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Changing cams
« Reply #1 on: March 24, 2009, 07:55:18 PM »
I think I did mine without removing the radiator, but its been a while.
Logged

Offline jfrabat

  • Gargantuan Mango Tree MechanicŪ
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Changing cams
« Reply #2 on: March 25, 2009, 06:08:51 PM »
Quote from: Bounty Hunter on March 24, 2009, 07:55:18 PM
I think I did mine without removing the radiator, but its been a while.

I think I'll use the new cam to measure the distance and go from there...
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

THEGAME304

  • Guest
Re: Changing cams
« Reply #3 on: April 04, 2009, 09:27:31 AM »
im interested in doing this also , but i cant find where to get the cam and lifters at . where do you order these from? and are they for 2.5's? 
Logged

THEGAME304

  • Guest
Re: Changing cams
« Reply #4 on: April 08, 2009, 01:48:44 AM »
damn no replies? dont wanna help someone out huh?
Logged

Offline chardrc

  • Member
  • Posts: 3535
Re: Changing cams
« Reply #5 on: April 08, 2009, 07:41:16 AM »
Quote from: THEGAME304 on April 08, 2009, 01:48:44 AM
damn no replies? dont wanna help someone out huh?

the mopar ones you have to get second hand and are hard to find.. yjmechanic used a cam and springs from clifford for his build up...
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline dexetr30

  • 4BangerJP.comŪ Donator
  • Member
  • *
  • Posts: 1261
  • Aloha Mr. Hand!
Re: Changing cams
« Reply #6 on: April 08, 2009, 09:00:13 AM »
Hesco has cams also. They're not Mopar brand though. I'm not sure if you want Mopar specific parts. If not, Hesco has them here: http://www.hesco.us/shop.asp?action=cat&catID=7758
Logged
02 2.5.L automatic: 4.0L t.b., 4.0l air intake, K&N filter, Scream'n Demon coil, 8.5mm MSD Super Conductor plug wires, Stage 1 Jet Chip, 29" BFG all terrain KO's. Taurus E-fan, Hummer front bumper, Skyjacker high capacity trans pan, 48" hi-lift, Rubi susp w. 3/4" BB.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Changing cams
« Reply #7 on: April 08, 2009, 08:07:38 PM »
Quote from: dexetr30 on April 08, 2009, 09:00:13 AM
Hesco has cams also. They're not Mopar brand though. I'm not sure if you want Mopar specific parts. If not, Hesco has them here: http://www.hesco.us/shop.asp?action=cat&catID=7758
Good luck finding a NOS Mopar cam anywhere anymore.  I probably should have kept mine but I did get 4x more then I paid for it.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."
Pages: [1]   Go Up
« previous next »