« previous next »
Pages: [1]   Go Down

Author Topic: are these considered high RPMs?  (Read 1356 times)

0 Members and 1 Guest are viewing this topic.

Offline stan98tj

  • Empty Wallet Wheeling Since 2007®
  • Member
  • *
  • Posts: 1816
  • Wheeling New England
are these considered high RPMs?
« on: August 19, 2009, 07:54:41 PM »
I have an automatic and im running 31s..at 58-60mph my RPMs are at 27-2800 at 65mph im at 3000 at 30-40 im somwhere between 1500 and 2000. are these considered high?? i feel like they should be lower for some reason.
Logged
98 TJ 35"Maxxis Trep.Old Man Emu 2.5""+1"BL,IronMan Fab control arms,4.56gears,Ford 8.8+ARB,Currie/IronMan steering, WARN VR10,HP D30 sleeved+ RCV,Body Armor Rock Rails WISHLIST:TDi.Girlfriend hates it :) If you can read this don't flip me over i dont have any $$ left to fix it

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: are these considered high RPMs?
« Reply #1 on: August 19, 2009, 08:14:04 PM »
Quote from: stan98tj on August 19, 2009, 07:54:41 PM
I have an automatic and im running 31s..at 58-60mph my RPMs are at 27-2800 at 65mph im at 3000 at 30-40 im somwhere between 1500 and 2000. are these considered high?? i feel like they should be lower for some reason.
since at 5250rpm you'll reach 114mph  i think it's fine :roflol:

now being serious i don't think the revs are too high
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: are these considered high RPMs?
« Reply #2 on: August 19, 2009, 08:17:15 PM »
The torque band in the 2.5L ussually starts at about 2500, so you should not have any problems.  I have a stick, and mine also runs at about 2,800 at 65mph (in 4th, but I use 4th more often than 5th at this speed).
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: are these considered high RPMs?
« Reply #3 on: August 19, 2009, 08:52:58 PM »
Those are fine, the 2.5L is perfectly comfortable between 3k and 3500.  The 2.5L likes the revs.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: are these considered high RPMs?
« Reply #4 on: August 19, 2009, 09:30:31 PM »
My sweep spot starts at around 2250RPM's and will run strong till around 3700RPM.  I shift around 25-3000RPM so it's still in the powerband in the next gear.  I will rev till 4000RPM when getting onto the freeway.  I've been over 5000RPM a couple of times as well.  Pretty normal for a 2.5L.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline stan98tj

  • Empty Wallet Wheeling Since 2007®
  • Member
  • *
  • Posts: 1816
  • Wheeling New England
Re: are these considered high RPMs?
« Reply #5 on: August 19, 2009, 09:57:50 PM »
thanks for the input guys! i guess i was put off by it when i was ridin in my buddy's jeep (he has the 4.0) and i noticed him around 2k at 55-60mph..although i knew the 4banger would rev higher than a 6, i guess i started feeling like 2800 was a bit too high. i dunno. if it's all normal then im good to go. thanks again!
stan
Logged
98 TJ 35"Maxxis Trep.Old Man Emu 2.5""+1"BL,IronMan Fab control arms,4.56gears,Ford 8.8+ARB,Currie/IronMan steering, WARN VR10,HP D30 sleeved+ RCV,Body Armor Rock Rails WISHLIST:TDi.Girlfriend hates it :) If you can read this don't flip me over i dont have any $$ left to fix it

Offline jagular7

  • Member
  • Posts: 987
Re: are these considered high RPMs?
« Reply #6 on: August 20, 2009, 09:15:29 AM »
I pull ~3300rpms at highway speed on 35's/4.88s. So I think you are lacking....
Logged
Jagular7
97 SE - Rubbered and locked for fun
94 SE - stock, collecting parts for 37s

Offline stan98tj

  • Empty Wallet Wheeling Since 2007®
  • Member
  • *
  • Posts: 1816
  • Wheeling New England
Re: are these considered high RPMs?
« Reply #7 on: August 20, 2009, 11:41:47 AM »
Quote from: jagular7 on August 20, 2009, 09:15:29 AM
I pull ~3300rpms at highway speed on 35's/4.88s. So I think you are lacking....
3300? im never really above 3k. 65mph and she sits right at 3k...a few times ive had her near 4k but as soon as i let off the gas she'll shift, but if its anything from 50-65 shes at 2800-3000 or a hair above.
Logged
98 TJ 35"Maxxis Trep.Old Man Emu 2.5""+1"BL,IronMan Fab control arms,4.56gears,Ford 8.8+ARB,Currie/IronMan steering, WARN VR10,HP D30 sleeved+ RCV,Body Armor Rock Rails WISHLIST:TDi.Girlfriend hates it :) If you can read this don't flip me over i dont have any $$ left to fix it

Offline jagular7

  • Member
  • Posts: 987
Re: are these considered high RPMs?
« Reply #8 on: August 20, 2009, 02:11:55 PM »
Quote from: jagular7 on August 20, 2009, 09:15:29 AM
I pull ~3300rpms at highway speed on 35's/4.88s. So I think you are lacking....

Add, 3-sp automatic. It will downshift to raise another 4-500rpms (I can do the same with touching the brake) but it really doesn't have enough umph.
Logged
Jagular7
97 SE - Rubbered and locked for fun
94 SE - stock, collecting parts for 37s
Pages: [1]   Go Up
« previous next »