« previous next »
Pages: [1] 2   Go Down

Author Topic: where to get part?  (Read 1558 times)

0 Members and 1 Guest are viewing this topic.

Offline bootguy

  • Member
  • Posts: 117
  • TANSTAAFL There Aint No Such Thing As A Free Lunch
where to get part?
« on: November 11, 2009, 12:29:44 AM »
where can I find a 4.0 throttle body for very own?  do they only come on the Jeeps or is there other places to get them?  Also will a spacer really do anything if you have fuel injecton?
Logged
1994 Jeep Wrangler, 2.5L, automatic, 2.5" lift, 4:88 gearing, 33" tires, 2.5" exhaust from manifold back, air restrictor removed.

Offline bootguy

  • Member
  • Posts: 117
  • TANSTAAFL There Aint No Such Thing As A Free Lunch
Re: where to get part?
« Reply #1 on: November 11, 2009, 12:50:10 AM »
Is the 62mm throttle body that Bounty Hunter is selling the same thing as the 4.0 throttle body?
Logged
1994 Jeep Wrangler, 2.5L, automatic, 2.5" lift, 4:88 gearing, 33" tires, 2.5" exhaust from manifold back, air restrictor removed.

C.Redbeardd

  • Guest
Re: where to get part?
« Reply #2 on: November 11, 2009, 01:06:46 AM »
Those are the 4.0 throttle bodies I believe. Go into that thread and inquire about it. He'll let you know if it'll work for you.
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: where to get part?
« Reply #3 on: November 11, 2009, 06:41:48 AM »
i have one for sale in "Garage Sale" section
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline chardrc

  • Member
  • Posts: 3535
Re: where to get part?
« Reply #4 on: November 11, 2009, 07:32:05 AM »
Quote from: bootguy on November 11, 2009, 12:50:10 AM
Is the 62mm throttle body that Bounty Hunter is selling the same thing as the 4.0 throttle body?

the 62mm is a bored out 4.0l throttle body for even more increased flow.. 
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: where to get part?
« Reply #5 on: November 11, 2009, 01:41:46 PM »
Quote from: bootguy on November 11, 2009, 12:29:44 AM
where can I find a 4.0 throttle body for very own?  do they only come on the Jeeps
or is there other places to get them?  Also will a spacer really do anything if you have fuel injecton?

It absolutely makes a difference on my Jeep. It moves the power band down about 400 rpm, so the power comes on sooner.
95 YJ with 2.5// Engine built up a fair bit.

Dave
Logged
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: where to get part?
« Reply #6 on: November 11, 2009, 07:54:53 PM »
The 4.0L TB is somewhere around 55mm at the taper, my 62mm has a straight through bore for a huge increase in throttle response.  I have several available as well as spacers.
Logged

jeeper78

  • Guest
Re: where to get part?
« Reply #7 on: November 11, 2009, 10:23:06 PM »
^^^^^
Go with Bounty hunter on this one!!!
Biggest BOOM for the buck!!


*bang* doesn't do it justice!
Logged

Offline bootguy

  • Member
  • Posts: 117
  • TANSTAAFL There Aint No Such Thing As A Free Lunch
Re: where to get part?
« Reply #8 on: November 11, 2009, 11:22:38 PM »
Do I need to open up the intake manifold also, or is that already open enough?
Logged
1994 Jeep Wrangler, 2.5L, automatic, 2.5" lift, 4:88 gearing, 33" tires, 2.5" exhaust from manifold back, air restrictor removed.

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: where to get part?
« Reply #9 on: November 11, 2009, 11:27:57 PM »
You will need to open it up, I used plastic wrap and blocks of playdough to block the manifold
had a shop vac running used a die grinder to open it up. I only have a 60 its a stock 4.0 unit and
I needed to do it.

Just use the new TB or spacer as a pattern and draw around the
inside of it with a sharpie on the manifold, grind to the line.... :)

Dave

Logged
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: where to get part?
« Reply #10 on: November 11, 2009, 11:32:39 PM »
mine was the same opening as the 4.0L t/b so i didn't need to do it, but i know you have to for the 62mm one.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline bootguy

  • Member
  • Posts: 117
  • TANSTAAFL There Aint No Such Thing As A Free Lunch
Re: where to get part?
« Reply #11 on: November 13, 2009, 02:44:13 PM »
Do you have to change out the rubber part from the throttle body to the air filter box, or does that stay the same?
Logged
1994 Jeep Wrangler, 2.5L, automatic, 2.5" lift, 4:88 gearing, 33" tires, 2.5" exhaust from manifold back, air restrictor removed.

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: where to get part?
« Reply #12 on: November 13, 2009, 02:46:45 PM »
The 62mm TB is externally identical to the TB you're replacing, so everything attaches the same.
Logged

Offline bootguy

  • Member
  • Posts: 117
  • TANSTAAFL There Aint No Such Thing As A Free Lunch
Re: where to get part?
« Reply #13 on: November 13, 2009, 03:06:21 PM »
The next question is the spacer.  A mechanic I know says they work well with a carb but does nothing for fuel injected vehicles.  any truth to this??
Logged
1994 Jeep Wrangler, 2.5L, automatic, 2.5" lift, 4:88 gearing, 33" tires, 2.5" exhaust from manifold back, air restrictor removed.

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: where to get part?
« Reply #14 on: November 13, 2009, 06:19:58 PM »
It's pretty hotly debated, retailers state hp improvements but I've seen magazine articles that refuted them.  Personal choice, I've noticed slight improvements myself, nothing more than seat of the pants to back it up.  Mine are only $40, so choice is yours.
Logged
Pages: [1] 2   Go Up
« previous next »