Topic: Got her fire up today. :) But gettin some codes

[Complete Loser]

Well, i put on a pacesetter header, a tb spacer, and a 4.0 throttle body. Along with a 130a alt. She runs, but doesnt start or run as good as i would have hoped.
The idle is very smooth and at about 900rpm.

I bought a new TPS for my 2.5 tb and went ahead and put it in this 4.0 tb. Now i am getting a tps code (24). Just wondering if i need to go back to the original 4.0 tb sensor?

The other codes are
12 and 33

[sharpxmen]

Well, i put on a pacesetter header, a tb spacer, and a 4.0 throttle body. Along with a 130a alt. She runs, but doesnt start or run as good as i would have hoped.
The idle is very smooth and at about 900rpm.

I bought a new TPS for my 2.5 tb and went ahead and put it in this 4.0 tb. Now i am getting a tps code (24). Just wondering if i need to go back to the original 4.0 tb sensor?

The other codes are
12 and 33

i would take the tps back and get another one

swap the IAC valve and housing as well

[Complete Loser]

I was going to swap the IAC. I pulled them both off, and they both looked a good bit different internally. The 'plunger' part of them looked bigger on the 4.0. ?  So i left them on their respective throttle bodies.

[sharpxmen]

I was going to swap the IAC. I pulled them both off, and they both looked a good bit different internally. The 'plunger' part of them looked bigger on the 4.0. ?  So i left them on their respective throttle bodies.

you need the 2.5L IAC valve and housing on the 4.0 t/b - the 4.0 require a lot more air at idle than the 2.5 that's why they are different.

[Complete Loser]

Im such a gomer. I didnt even notice that the housing was removable. Thanks.... yet.... again.

I feel like i should be paying you guys.   How bout a round of beers? 

[Complete Loser]

Awesome! Those require the torx bits with the hole in the middle!  Now this is turning out like a normal vehicle project.  Off to get some bits. lol

[sharpxmen]

Im such a gomer. I didnt even notice that the housing was removable. Thanks.... yet.... again.

I feel like i should be paying you guys.   How bout a round of beers? 

if you're ever in Vancouver i'll take you up on that

not sure if it will fix your tps code though, but i would at least reset the computer.

[Torch_Ind]

Awesome! Those require the torx bits with the hole in the middle!

there called tamper prof torx

[Complete Loser]

yup. just bought some of the torx bits. They sure are proud of them. $23 for about 7 bits.

How do i reset the codes on the computer.

[sharpxmen]

yup. just bought some of the torx bits. They sure are proud of them. $23 for about 7 bits.

How do i reset the codes on the computer.

remove the ground from battery, touch it to the + and leave it off for 5 minutes.