Author Topic: Need help with Prob!  (Read 3854 times)

0 Members and 2 Guests are viewing this topic.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Need help with Prob!
« Reply #15 on: May 01, 2010, 07:35:30 PM »
Het jeffy, where do I take it to recalibrate it? Like a dealer? Would I still need the speedo gear? And if I fluctuate between 35s and 33s what tooth count would y'all recamenened?
From the FAQ: http://4bangerjp.com/forums/index.php/topic,731.0.html
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

roksld13

  • Guest
Re: Need help with Prob!
« Reply #16 on: May 02, 2010, 06:27:36 PM »
Cool thanks. Ok so 33" is 41 tooth and 35" is 30 tooth. If I go back and forth between the tire sizes which should I go with?

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Need help with Prob!
« Reply #17 on: May 02, 2010, 07:30:52 PM »
If switching between two tire sizes (I do between onroad use and off), I'd highly recommend this $80 speedo signal interface from Dakota Digital: http://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=126/category_id=287/home_id=59/mode=prod/prd126.htm

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Need help with Prob!
« Reply #18 on: May 02, 2010, 08:11:13 PM »
Cool thanks. Ok so 33" is 41 tooth and 35" is 30 tooth. If I go back and forth between the tire sizes which should I go with?

you mean 39 teeth for 35'' (i'm guessing it was a typo but just in case)
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline aka-justin

  • Member
  • Posts: 883
Re: Need help with Prob!
« Reply #19 on: May 03, 2010, 01:45:05 AM »
Nice find bounty!  I've only seen similar ones for $200+, like Superlifts TruSpeed Speedometer Recalibration device. http://www.quadratec.com/products/16202_000.htm?sgsc=QSHOPGBASE&utm_medium=compshop&utm_source=googlemerchant

[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: Need help with Prob!
« Reply #20 on: May 03, 2010, 08:12:11 AM »
There's a little more to the calibration on a Dakota Digital unit, but well worth the $80 and the savings over other products on the market.

Offline chrisfranklin

  • 4BangerJP.comŪ Donator
  • Member
  • *
  • Posts: 1276
Re: Need help with Prob!
« Reply #21 on: May 04, 2010, 10:04:55 PM »
Well the big question for starters is will it rev to close to 5 grand in first second and third? if no, start with part 1 if it's a manual get er rollin in first gear then whem it barely rolls stick it in third and floor it, if it does not back fire then the plugs and wires should be ok then it's on to fuel or an exhaust restriction. Thias is the none scientific method, but it gets you pointed in the right direction fairly quick. a fuel supply problem will show mostly in 5 th gear or near the top in 4th it will hold basck at full throttle, but will pick up speed when you ease up on the throttle a little.

Art,  I've long noticed that my engine seems like it falls off a little in 4th, but especially 5th vs. the lower gears.  And It doesn't feel like it's the highway terrain or anything that the engine is fighting.  It literally seems like the engine itself is dialing back slightly.

This was happening before I made the change to the Ford injectors and I am pretty sure the Fords I have are 100%.  I also change the fuel filter at the recommended intervals.    Thinking about what else in the fuel system, if anything, might be causing this. 
'94 YJ S 5spd, Borla Exhaust, CarSound Cat., PS Ceramic-coated Headers, Airraid intake, 62mm TB, Intake Manifold bored/ceramic-coated, 19lb injectors, Sharp's Adj. FPR, MeanGreen Starter, D30 Aussie locker, 31" Destination MTs, Warn XD9000, Cibie headlights, armor

Offline aw12345

  • Member
  • Posts: 3065
    • my jeep picture page
Re: Need help with Prob!
« Reply #22 on: May 05, 2010, 05:58:34 AM »
Seems to me a good start would be to make sure that the fuel pressure under full load is up to snuff. Meaning a gauge hooked up so it can be read while driving and then drive it flatout in top gear.  A failing or worn pump that does not quite produce adequate volume of fuel is otherwise not that easy to catch
2006 Jeep Wrangler TJ SE
2004 Jeep Wrangler TJ SE

Offline neale_rs

  • Member
  • Posts: 3583
Re: Need help with Prob!
« Reply #23 on: May 05, 2010, 08:08:31 AM »
x2  I really don't think adjusting the speedo is going to help much (good to do but not to solve this particualr acceleration problem), mine is off a bit and it doesn't cause any acceleration problems.



'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

roksld13

  • Guest
Re: Need help with Prob!
« Reply #24 on: May 06, 2010, 11:43:27 AM »
Ok so got my exhuast and everything it good, my next is to go to the fuel managment. I'm going to check into the pressure gauges this weekend.  Thanks for the info on the digital meter, that sounds like the way to go, one question is it moderatly easy to hook up? I've been wanting to go with the ford injectors for a while, I read the write up jeffy did, great deal of info.  Alittle hard to undestand with all the equations, lol. Anyways that's plus my steering to get working right and I'm going to be broke!!

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Need help with Prob!
« Reply #25 on: May 06, 2010, 12:57:15 PM »
Ok so got my exhuast and everything it good, my next is to go to the fuel managment. I'm going to check into the pressure gauges this weekend.  Thanks for the info on the digital meter, that sounds like the way to go, one question is it moderatly easy to hook up? I've been wanting to go with the ford injectors for a while, I read the write up jeffy did, great deal of info.  Alittle hard to undestand with all the equations, lol. Anyways that's plus my steering to get working right and I'm going to be broke!!

for the equations: what all that means is that the flow and pressure do not vary on a linear basis and in case you use injectors that have a rated flow at a different fuel pressure than yours you will need to calculate the flow to match with the stock injectors (or go a bit higher but i wouldn't recommend more than 5 to 7% flow increase).

Keep in mind that since you have a TJ the Ford 19# injectors will not work on your vehicle, so unless you find something to match the flow do not attempt. That's where the equations come in, but all you need is to find an online flow calculator if you want to take that route - your fuel pressure is 49psi, you will need the flow and pressure for the new injectors to calculate the resulting flow at 49psi as it is on your Jeep.
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline chrisfranklin

  • 4BangerJP.comŪ Donator
  • Member
  • *
  • Posts: 1276
Re: Need help with Prob!
« Reply #26 on: May 07, 2010, 02:08:27 AM »
Seems to me a good start would be to make sure that the fuel pressure under full load is up to snuff. Meaning a gauge hooked up so it can be read while driving and then drive it flatout in top gear.  A failing or worn pump that does not quite produce adequate volume of fuel is otherwise not that easy to catch

I'll have to look for one of those gauges with a 6ft hose so I can test/drive at the same time.
'94 YJ S 5spd, Borla Exhaust, CarSound Cat., PS Ceramic-coated Headers, Airraid intake, 62mm TB, Intake Manifold bored/ceramic-coated, 19lb injectors, Sharp's Adj. FPR, MeanGreen Starter, D30 Aussie locker, 31" Destination MTs, Warn XD9000, Cibie headlights, armor

Offline aka-justin

  • Member
  • Posts: 883
Re: Need help with Prob!
« Reply #27 on: May 08, 2010, 01:05:26 AM »
My probably in 5th gear has been getting worse as now I'm driving mine everyday.  I'm going to have to check the cat and the fuel pressure too.  I know the speed sensor plays into it, but now mines acting up at lower speeds as it wasn't before.  Already did (over the last year and half) air cleaner, o2 sensor, plugs, tps sensor, and had a clean smog test, but 1st gear seems to be almost dieing if I accelerate hard during the hot day.  I'll let you know my results.  Good luck.
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

roksld13

  • Guest
Re: Need help with Prob!
« Reply #28 on: May 08, 2010, 03:29:29 PM »
What does it feel like when u say "first gear acts up"? Is it like sliping, I know what that would feel like.  The reason I ask is I can tell a diffrence in temp the way my jeep performes

Offline aka-justin

  • Member
  • Posts: 883
Re: Need help with Prob!
« Reply #29 on: May 08, 2010, 03:30:47 PM »
If I lightly accelerate, it's ok.  If I try to go a bit faster (drop the clutch and step on it semi fast) its almost like it looses all power and then slowly surges back.
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin