« previous next »
Pages: 1 [2]   Go Down

Author Topic: In-dash guages  (Read 3686 times)

0 Members and 5 Guests are viewing this topic.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: In-dash guages
« Reply #15 on: August 23, 2010, 10:49:58 PM »
Quote from: Torch_Ind on August 23, 2010, 05:01:30 PM


where did you get this jeffy or do you have to make it?
Once upon a time, there was a company that made them.  You could make one with a break and some 18-20 gauge.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Torch_Ind

  • Guest
Re: In-dash guages
« Reply #16 on: August 24, 2010, 10:43:16 AM »
I liked the factory look with the auto-meter gauges better then the quadratec one
Logged

TrailsLessTaken

  • Guest
Re: In-dash guages
« Reply #17 on: August 24, 2010, 11:10:41 AM »
I like the quadratec holder cause it still looks factory, but the gauges are more angled towards the driver as they get further out
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: In-dash guages
« Reply #18 on: August 24, 2010, 02:11:14 PM »
Quote from: TrailsLessTaken on August 24, 2010, 11:10:41 AM
I like the quadratec holder cause it still looks factory, but the gauges are more angled towards the driver as they get further out

they are hard to see (read precisely) otherwise - i had mine flat and then i got the autometer angle shims (or whatever they are called) and done the same thing - had them progressively point the gauges more toward the driver the further away they are.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: In-dash guages
« Reply #19 on: August 24, 2010, 08:15:34 PM »
The problem with the Autometer bezels is that they aren't exactly the same as the OEM and look a bit 3rd rate.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Torch_Ind

  • Guest
Re: In-dash guages
« Reply #20 on: August 25, 2010, 08:42:05 AM »
Quote from: Jeffy on August 24, 2010, 08:15:34 PM
The problem with the Autometer bezels is that they aren't exactly the same as the OEM and look a bit 3rd rate.

+1

I just don't like the look of that one.  I would ditch the hole yj dash set up and go like a cj style before going that way with more plastic!!!
« Last Edit: August 25, 2010, 08:43:11 AM by Torch_Ind »
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: In-dash guages
« Reply #21 on: August 25, 2010, 01:03:36 PM »
Quote from: Torch_Ind on August 25, 2010, 08:42:05 AM
+1

I just don't like the look of that one.  I would ditch the hole yj dash set up and go like a cj style before going that way with more plastic!!!
Yeah, the problem with that is you have to figure out how to get everything working again.  The defroster for example, many just leave it out but if you drive in cold climates then it's more important.  Same goes for the HVAC controls.  You are also left with exposed wiper controls so you'll need to plug those.  Then you'll need to modify a CJ wiper motor cover as well.  If you're going to do that then you might as well, start from scratch so you're not stuck with the huge 5" gauge.  Now it's turned into a huge project.  :lol:
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

TrailsLessTaken

  • Guest
Re: In-dash guages
« Reply #22 on: August 25, 2010, 02:21:23 PM »
yeah that just sounds like way more work than its worth, maybe im just lazy  :lol:
Logged

TrailsLessTaken

  • Guest
Re: In-dash guages
« Reply #23 on: August 27, 2010, 07:33:13 AM »
Quote from: YJeeper on August 27, 2010, 01:53:26 AM
Simple mod turns into a money and time spending project...

I thought thats what Jeeps were all about  :wall:
Logged
Pages: 1 [2]   Go Up
« previous next »