« previous next »
Pages: [1]   Go Down

Author Topic: Putting the new seats in today  (Read 2348 times)

0 Members and 4 Guests are viewing this topic.

Offline grumpygy

  • Member
  • Posts: 882
Putting the new seats in today
« on: July 30, 2011, 07:56:06 PM »
  Taking my time cause I'm also going to put in some stuff called boom mat.  Should help deaden the noise and insulate the cab.  Still waiting on the new carpet to arrive.  Will get some photo's when I have that in.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline Mozman68

  • Poseur ExtraordinaireŽ
  • Member
  • *
  • Posts: 2660
Re: Putting the new seats in today
« Reply #1 on: August 06, 2011, 07:03:31 AM »
Which ones did you go with?
Logged
2009 Audi S5....what....its 4wd...sort of....

Offline grumpygy

  • Member
  • Posts: 882
Re: Putting the new seats in today
« Reply #2 on: August 06, 2011, 09:12:34 AM »
Some cheap ones off of E-bay.  May have a problem as they are a little longer and wider than stock.  Center Console will not fit back in and with the front longer I do not feel comfortable reaching for the Pedals.  Also I have to slide the seat back each time just to get out, legs are real close to the steering wheel.

  I have a couple of other seats in the garage one I was going to use in my VW and one I bought for the VW but they were to wide.  Those have all the adjustments to include lumbar support so they will be the 1st ones I try.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Torch_Ind

  • Guest
Re: Putting the new seats in today
« Reply #3 on: August 06, 2011, 12:46:33 PM »
pictures?
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Putting the new seats in today
« Reply #4 on: August 06, 2011, 02:07:31 PM »
Quote from: grumpygy on August 06, 2011, 09:12:34 AM
Some cheap ones off of E-bay.  May have a problem as they are a little longer and wider than stock.  Center Console will not fit back in and with the front longer I do not feel comfortable reaching for the Pedals.  Also I have to slide the seat back each time just to get out, legs are real close to the steering wheel.

  I have a couple of other seats in the garage one I was going to use in my VW and one I bought for the VW but they were to wide.  Those have all the adjustments to include lumbar support so they will be the 1st ones I try.
You can usually adjust the seats a little by drilling new mount holes or making adapter brackets.  I don't use the sliders which allows me even more flexibility.  It also lowered the seat an inch which helped since my seats have a lot of padding in the front.  This made getting in and out a PITA.  My console is huge and I ended up moving my seats outboard an inch to allow a bit more room.  IIRC my seats are 22" wide and thw stock seats are 20".

I'd like to add the sliders back in for a bit more flexibility so I might get some Corbeau mounts which I think are lower then stock.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline grumpygy

  • Member
  • Posts: 882
Re: Putting the new seats in today
« Reply #5 on: August 06, 2011, 04:26:55 PM »
Pictures as soon as I finish some of it up.  Now have the dash torn out changing the color and cleaning all the grime that has built up on the back side since 94.  Redoing the stereo also so wires are everywhere.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline grumpygy

  • Member
  • Posts: 882
Re: Putting the new seats in today
« Reply #6 on: August 07, 2011, 07:34:22 PM »
Quote from: Jeffy on August 06, 2011, 02:07:31 PM
You can usually adjust the seats a little by drilling new mount holes or making adapter brackets.  I don't use the sliders which allows me even more flexibility.  It also lowered the seat an inch which helped since my seats have a lot of padding in the front.  This made getting in and out a PITA.  My console is huge and I ended up moving my seats outboard an inch to allow a bit more room.  IIRC my seats are 22" wide and thw stock seats are 20".

I'd like to add the sliders back in for a bit more flexibility so I might get some Corbeau mounts which I think are lower then stock.

I will let you know on the Corbeau mounts just ordered them.  I took the spacers completly out that is between the seat and sliders.  Now the sliders will not lock.  Will put the spacers back in till I get the new mount.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline sharpxmen

  • Chief Squirrel BlowerŽ
  • Member
  • *
  • Posts: 7093
Re: Putting the new seats in today
« Reply #7 on: August 07, 2011, 07:43:00 PM »
Quote from: grumpygy on August 07, 2011, 07:34:22 PM
I took the spacers completly out that is between the seat and sliders.  Now the sliders will not lock.  Will put the spacers back in till I get the new mount.
did the same with mine and had to mod something there to get them to work, been a long time and can't remember what it was though, something with the lever (i think i had to bend it down as the bottom of the seat was pressing on it and that's why the locks were not going into the grooves in the rails). With the spacers they were too high up.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline grumpygy

  • Member
  • Posts: 882
Re: Putting the new seats in today
« Reply #8 on: August 07, 2011, 09:26:18 PM »
Quote from: sharpxmen on August 07, 2011, 07:43:00 PM
did the same with mine and had to mod something there to get them to work, been a long time and can't remember what it was though, something with the lever (i think i had to bend it down as the bottom of the seat was pressing on it and that's why the locks were not going into the grooves in the rails). With the spacers they were too high up.

For now I'll just put the spacers back as it really did not gain me that much.  I got the new mounts ordered.  Even if they do not lower it they look to be easier to modify than the stock ones.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline grumpygy

  • Member
  • Posts: 882
Re: Putting the new seats in today
« Reply #9 on: August 11, 2011, 06:10:47 PM »
The new Corbeau mounts are right at 2" shorter than stock.  I just got them in and stoped long enough to measure them.  Now to finish the job.  One little problem is you will need bolts to replace the two that are part of the old mount as the new ones do not come with them.  
« Last Edit: August 11, 2011, 06:13:22 PM by grumpygy »
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Putting the new seats in today
« Reply #10 on: August 11, 2011, 08:12:16 PM »
Quote from: grumpygy on August 11, 2011, 06:10:47 PM
The new Corbeau mounts are right at 2" shorter than stock.  I just got them in and stoped long enough to measure them.  Now to finish the job.  One little problem is you will need bolts to replace the two that are part of the old mount as the new ones do not come with them. 
Hmm, 2 inches huh?  Good to know!  I need to put them on my list of things to get for sure.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline grumpygy

  • Member
  • Posts: 882
Re: Putting the new seats in today
« Reply #11 on: August 14, 2011, 07:09:39 PM »
Still waiting on Carpet so here it is without But the new seats and new mount.

Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline chardrc

  • Member
  • Posts: 3535
Re: Putting the new seats in today
« Reply #12 on: August 15, 2011, 04:57:23 PM »
those seats look very nice. the red even matches the jeep
Logged
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr
Pages: [1]   Go Up
« previous next »