Author Topic: Wheel backspacing  (Read 1442 times)

0 Members and 5 Guests are viewing this topic.

Offline BoringDave

  • Member
  • Posts: 92
Wheel backspacing
« on: March 11, 2012, 05:58:13 PM »
SOA with OME springs what backspace wheels should I use with 35's? I have stock jeep canyons on it now with 33/10.50 and I know those wheels won't work.

Should I get 15x10 w/4" back space or 15x8 w/3.75? I don't really like the idea of them sticking out to far and don't want to buy wider flairs if I do decide to drive it on the street.

Dave

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Wheel backspacing
« Reply #1 on: March 11, 2012, 06:13:05 PM »
Well, whatever you do your tires are going to stick past the flares.  You could add 1" spacers to your Canyon's and then adjust the steering stops and keep the tire mostly under the stock flares.  That would give you 4.5" BS.  I wouldn't go with less then 4.25" if you want to stay under the stock flares.  8" wide wheel with 3.75" is going to put around 4" of the tire outside the stock flare.  You'll need 6-7" wide flares to cover the tires 100%.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline BoringDave

  • Member
  • Posts: 92
Re: Wheel backspacing
« Reply #2 on: March 18, 2012, 03:27:09 PM »
Well, whatever you do your tires are going to stick past the flares.  You could add 1" spacers to your Canyon's and then adjust the steering stops and keep the tire mostly under the stock flares.  That would give you 4.5" BS.  I wouldn't go with less then 4.25" if you want to stay under the stock flares.  8" wide wheel with 3.75" is going to put around 4" of the tire outside the stock flare.  You'll need 6-7" wide flares to cover the tires 100%.

I think I found what I need, Black Rock steel D window 15x8 with 4 1/2" back space.  Do you think 35's will rub on the springs with them?

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Wheel backspacing
« Reply #3 on: March 18, 2012, 04:33:43 PM »
I think I found what I need, Black Rock steel D window 15x8 with 4 1/2" back space.  Do you think 35's will rub on the springs with them?
A little but you can turn out the steering stops a bit.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Wheel backspacing
« Reply #4 on: March 18, 2012, 05:29:07 PM »
A little but you can turn out the steering stops a bit.

i was rubbing the 31s against the leafs with stock backspacing (i don't know what that is though but if it's 4-1/2 with 35s will rub for sure)
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Wheel backspacing
« Reply #5 on: March 18, 2012, 06:27:52 PM »
Stock is 5.5".
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: Wheel backspacing
« Reply #6 on: March 18, 2012, 09:42:31 PM »
Stock is 5.5".
in that case it's probably ok with the stops adjusted
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline smashcoast

  • Member
  • Posts: 305
Re: Wheel backspacing
« Reply #7 on: March 26, 2012, 06:52:24 PM »
You want your tires to be past the flares because it looks cooler. Also it gets the Jeep muddier!
Building this Jeep on the Cheap! Just like Chrysler!

Offline neale_rs

  • Member
  • Posts: 3583
Re: Wheel backspacing
« Reply #8 on: March 27, 2012, 09:49:15 AM »
For rocks, it's very good to have the tires sticking out, it helps keep the sheetmetal and flares intact. 
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Wheel backspacing
« Reply #9 on: March 27, 2012, 02:08:09 PM »
You want your tires to be past the flares because it looks cooler. Also it gets the Jeep muddier!
Meh, getting a face full of mud gets old after a while.

For rocks, it's very good to have the tires sticking out, it helps keep the sheetmetal and flares intact. 
That's what rockrails and rock flares are for.  I can have my tires stick out easilt if I took off my flares.  No reason to tear up the flares.
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."