« previous next »
Pages: [1] 2   Go Down

Author Topic: Honkhonk  (Read 4486 times)

0 Members and 4 Guests are viewing this topic.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Honkhonk
« on: June 20, 2013, 09:58:42 PM »
Finally getting rid of the anemic stock horn.  This is a Hella 400/500 combo.  The stock was a single 500.  I have to make a harness and wire up the relay still.

Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: Honkhonk
« Reply #1 on: June 21, 2013, 11:01:18 AM »
Looks good. 
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Honkhonk
« Reply #2 on: June 22, 2013, 12:48:24 PM »
Horny much?  :wall:  :lol: I guess that sounds pretty  :ghey:
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Honkhonk
« Reply #3 on: June 23, 2013, 12:49:03 AM »
no airhorn for you?  :wall:
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Honkhonk
« Reply #4 on: June 23, 2013, 01:20:45 PM »
So how does it sound? Same but louder?
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Honkhonk
« Reply #5 on: June 23, 2013, 01:28:45 PM »
Haven't had time to build the harness.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Honkhonk
« Reply #6 on: June 23, 2013, 02:13:57 PM »
Quote from: Jeffy on June 23, 2013, 01:28:45 PM
Haven't had time to build the harness.
isn't there a honk relay from factory?
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Honkhonk
« Reply #7 on: June 23, 2013, 04:26:16 PM »
Quote from: sharpxmen on June 23, 2013, 02:13:57 PM
isn't there a honk relay from factory?
I haven't looked but the horns came with a relay as well.  I should check though.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Honkhonk
« Reply #8 on: June 23, 2013, 05:27:53 PM »
Ok, looks like the is a relay so I should be able to just hook them up.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Honkhonk
« Reply #9 on: June 23, 2013, 07:02:06 PM »
Quote from: Jeffy on June 23, 2013, 05:27:53 PM
Ok, looks like the is a relay so I should be able to just hook them up.

worst case just replace the relay if they're rated differently, i doubt the wires would need upgrading.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Honkhonk
« Reply #10 on: June 23, 2013, 07:52:41 PM »
It came with a 30A relay so I don't think I'll have to change it as that's pretty standard.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Honkhonk
« Reply #11 on: June 24, 2013, 11:10:23 AM »
I did a similiar thing a few years back...  Now it sounds good!
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline grumpygy

  • Member
  • Posts: 882
Re: Honkhonk
« Reply #12 on: June 24, 2013, 04:02:46 PM »
You got me thinking I need to get my Horn working again.  So replaced the relay and that was it.  So I had this laying around Bought it for the Harley and it did not fit anywhere out of sight.



The ad for it.

Quote
This is a full-power railroad locomotive/ocean liner type compressed air horn squeezed into a bike-mountable package. Totally overkill, until you need to wake up some lethal driver. It’s got both the high and low ear-splitting tones of the individually sold Fiamm Freeway Blaster Horns, plus a little more oomph. The 139dB high and low tone blasters combine via air induction to cut through the din and make the most distracted of drivers drop their cell phones and pay attention. Installs easily on all bikes with a 4.5"×3"×4.5" space for mounting. The loudest motorcycle horn available.

  It IS LOUD.  Ears still ringing.
« Last Edit: June 24, 2013, 04:04:45 PM by grumpygy »
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: Honkhonk
« Reply #13 on: June 25, 2013, 07:42:38 AM »
Quote from: grumpygy on June 24, 2013, 04:02:46 PM
You got me thinking I need to get my Horn working again.  So replaced the relay and that was it.  So I had this laying around Bought it for the Harley and it did not fit anywhere out of sight.



The ad for it.

  It IS LOUD.  Ears still ringing.

Oh, I LIKE IT!!!
Logged
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline grumpygy

  • Member
  • Posts: 882
Re: Honkhonk
« Reply #14 on: June 25, 2013, 09:01:56 AM »
I had just put in an Airaid cool air system, to get rid of my funky one.

  Well the Horn fits in that area Normally so I had to remove it.  Got to looking at where I could put it and under the filter mounted to the airaid housing worked great.  This horn has to face down so it does not fill with water.  It is really protected where I have it now.
Logged
94 YJ, Cool Air intake, 19lb Inj, 4.0 Throttlebody with spacer,  31/10.50/15's
Pages: [1] 2   Go Up
« previous next »