« previous next »
Pages: [1]   Go Down

Author Topic: Rocker guard brand?  (Read 1612 times)

0 Members and 3 Guests are viewing this topic.

Liljeepz

  • Guest
Rocker guard brand?
« on: May 06, 2007, 05:14:34 PM »
I'm looking to get some rocker guards for my TJ, any one suggest any good brands or what I should look for when buying them? I don't want to spend a fortune on them but I don't want junk either... some where in the middle. I was thinking about getting some with a sliding bar welded on them, but that's up in the air right now.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Rocker guard brand?
« Reply #1 on: May 06, 2007, 06:20:23 PM »
I like Kilby Enterprises stuff.  I know the owner and he makes sure they are up to a pretty high standard.  There are many knockoffs out there though.  Lots of inferior or copycat stuff that sometimes is cheaper but you may or may not get quality.

I do like rockers that have a nerf or step built into them.  This keeps the big stuff off the body and gives you a step to get in.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Rocker guard brand?
« Reply #2 on: May 06, 2007, 06:31:38 PM »
Make sure whatever you get ties into the body mounts.  There are several brands which are only attached to the sheetmetal.
Logged
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Rocker guard brand?
« Reply #3 on: May 06, 2007, 07:01:03 PM »
Quote from: oldjeep on May 06, 2007, 06:31:38 PM
Make sure whatever you get ties into the body mounts.  There are several brands which are only attached to the sheetmetal.

Just as or more important, you want the bolts inside to use brackets an not just large washers.  With a impact at 45* to the edge, it will try to twist the rocket and pull the bolts out at the top.  I've seen this happen first hand with Off Your Rockers on a TJ.  It wasn't a pretty sight.  Left a 1/8-1/4" gap and twisted the rocker and body.

I've seen some nice home made 1/4" L channels used for rockers that works well if you're on a budget.
« Last Edit: May 06, 2007, 07:03:22 PM by Jeffy »
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Jesse-James

  • Guest
Re: Rocker guard brand?
« Reply #4 on: May 06, 2007, 11:51:39 PM »
I peronally like the PSC rocker knockers, they use the body mount and have the slider bar for $300ish. I'm thinking on going that route myself.

Logged

Liljeepz

  • Guest
Re: Rocker guard brand?
« Reply #5 on: May 07, 2007, 01:52:58 PM »
Quote from: Jesse-James on May 06, 2007, 11:51:39 PM
I peronally like the PSC rocker knockers, they use the body mount and have the slider bar for $300ish. I'm thinking on going that route myself.


I like those a lot and there just a little over what I was wanting to pay... I think I will go with those. I like the kilby but there to much money, I don't want to spend $545 on just rocker guards. I do plan on getting there gas tank skid when I scrap up more cash.
Thanks for the info guys!
Logged

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Rocker guard brand?
« Reply #6 on: May 07, 2007, 03:55:43 PM »
These are the ones I'm buying, but their TJ model doesn't attach to the body mounts if that's an issue for you.
http://www.shrockworks.com/Jeep-YJ-Rock-Sliders-Rocker-Guards-Rocker-Protection-Rock-Rails-pr-16173.html
Logged
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Liljeepz

  • Guest
Re: Rocker guard brand?
« Reply #7 on: May 07, 2007, 08:17:57 PM »
Old Jeep, those where the ones I was looking at for the last year, I do like the idea of mounting them to the body mounts, I'm not going to be a rock climber or any thing like that just a trail rig, but it just sounds stronger. There about the same price too.
Logged

Greatwhite

  • Guest
Re: Rocker guard brand?
« Reply #8 on: May 08, 2007, 10:45:36 AM »
http://www.lodoffroad.com/jeep_rock_sliders.htm

Seems to be a nice product, secure mounting location on the frame, protects the underside of rocker as well as the side.
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Rocker guard brand?
« Reply #9 on: May 08, 2007, 02:53:51 PM »
Quote from: Greatwhite on May 08, 2007, 10:45:36 AM
http://www.lodoffroad.com/jeep_rock_sliders.htm

Seems to be a nice product, secure mounting location on the frame, protects the underside of rocker as well as the side.

Most have moved away from old school nerfs.  The nerfs do eat up some clearance since it hangs below the body.  (I still run old skool 3" shorty nerfs though.)
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline oldjeep

  • Member
  • Posts: 1800
    • www.Oldjeep.com
Re: Rocker guard brand?
« Reply #10 on: May 08, 2007, 06:28:08 PM »
Quote from: Jeffy on May 08, 2007, 02:53:51 PM
Quote from: Greatwhite on May 08, 2007, 10:45:36 AM
http://www.lodoffroad.com/jeep_rock_sliders.htm

Seems to be a nice product, secure mounting location on the frame, protects the underside of rocker as well as the side.

Most have moved away from old school nerfs.  The nerfs do eat up some clearance since it hangs below the body.  (I still run old skool 3" shorty nerfs though.)

And if you slide them across a pointy rock, it's really easy to get hung up on the support bars.
Logged
Chuck P
The clowns'? Oh, yeah, the clowns. We fight them too — entire armies, spilling out of Volkswagons. We do our best to fight them off, but they keep sending 'em in!
94 YJ - gone
98 ZJ - sons truck
97 TJ - daughters project

www.oldjeep.com

Jesse-James

  • Guest
Re: Rocker guard brand?
« Reply #11 on: May 08, 2007, 08:39:59 PM »
Quote from: Jeffy on May 08, 2007, 02:53:51 PM
(I still run old skool 3" shorty nerfs though.)

That's because you've had you're Jeep since they were cool!  8)
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Rocker guard brand?
« Reply #12 on: May 08, 2007, 08:57:32 PM »
Quote from: Jesse-James on May 08, 2007, 08:39:59 PM
Quote from: Jeffy on May 08, 2007, 02:53:51 PM
(I still run old skool 3" shorty nerfs though.)

That's because you've had you're Jeep since they were cool!  8)

Actually, since they were uncool...  :lol:  They're kinda cool now though.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Jesse-James

  • Guest
Re: Rocker guard brand?
« Reply #13 on: May 09, 2007, 05:38:32 AM »
DISCLAIMER: Coolness may vary from state to state.
Logged

Liljeepz

  • Guest
Re: Rocker guard brand?
« Reply #14 on: May 09, 2007, 03:04:01 PM »
Quote from: Jesse-James on May 09, 2007, 05:38:32 AM
DISCLAIMER: Coolness may vary from state to state.

Ya! In one state its even cool to put a block of cheese on your head! Weirdo's! :roflol:
Logged
Pages: [1]   Go Up
« previous next »