« previous next »
Pages: [1]   Go Down

Author Topic: fluid for clutch resivor how to get off  (Read 492 times)

0 Members and 3 Guests are viewing this topic.

JeffsJeep

  • Guest
fluid for clutch resivor how to get off
« on: October 22, 2008, 03:49:58 PM »
hey guys, i thank you alot for all your help so far.  i have a question regarding the master cylindar.  how do you get it off?  it looks like a pin where you take it off, but it is not taken off by an alan wrench.  how do i get it off after i took the bolts off?
thanks alot, Jeff
Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: fluid for clutch resivor how to get off
« Reply #1 on: October 22, 2008, 03:54:36 PM »
Quote from: JeffsJeep on October 22, 2008, 03:49:58 PM
hey guys, i thank you alot for all your help so far.  i have a question regarding the master cylindar.  how do you get it off?  it looks like a pin where you take it off, but it is not taken off by an alan wrench.  how do i get it off after i took the bolts off?
thanks alot, Jeff

Once the pin is removed and the pedal is free all you have to do is undo the two bolts on the firewall.  There is glue over the area so the master will stick to the firewall even with the two nuts removed.

You should be able to remove the plastic hose as well. There is a pin that holds it in place on the MC.  The other side is a Quick Disconnect.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

JeffsJeep

  • Guest
Re: fluid for clutch resivor how to get off
« Reply #2 on: October 22, 2008, 05:48:59 PM »
thanks for the help jeffy, you were correct just a pin.  you guys are awesome. :guns:
Logged
Pages: [1]   Go Up
« previous next »