« previous next »
Pages: [1]   Go Down

Author Topic: axle lube stain  (Read 999 times)

0 Members and 2 Guests are viewing this topic.

Offline neale_rs

  • Member
  • Posts: 3583
axle lube stain
« on: March 09, 2009, 08:47:54 AM »

My rear axle has developed a lube stain at one of the spring perches.  It seems that it has developed a hairline crack or pinhole where the perch was welded.  What would you recommend, try some transmission sealer or do a complete job (remove perch, do required welding, etc.)?

Thanks
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Jesse-James

  • Guest
Re: axle lube stain
« Reply #1 on: March 09, 2009, 09:20:52 AM »
Quote from: neale_rs on March 09, 2009, 08:47:54 AM
remove perch, do required welding, etc
:thumb:

Logged

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: axle lube stain
« Reply #2 on: March 09, 2009, 12:18:30 PM »
Remove and weld.  Otherwise, if it gets worse you probably won't be driving.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: axle lube stain
« Reply #3 on: March 09, 2009, 12:19:01 PM »
Weld it.
Logged

Offline neale_rs

  • Member
  • Posts: 3583
Re: axle lube stain
« Reply #4 on: March 09, 2009, 12:20:40 PM »
Ok, better fix it right before it gets any worse.  Thanks for the advice.

Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

BarneyJeep

  • Guest
Re: axle lube stain
« Reply #5 on: March 09, 2009, 12:52:35 PM »
your spring perch is where the full weight of the jeep is being supported...i would fix it correctly...
Logged

Offline neale_rs

  • Member
  • Posts: 3583
Re: axle lube stain
« Reply #6 on: March 09, 2009, 01:32:26 PM »
It's probably a good opportunity to have the perches moved to eliminate the need for shims.

Thanks

Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Jesse-James

  • Guest
Re: axle lube stain
« Reply #7 on: March 09, 2009, 01:38:09 PM »
That's what I did on mine. The ones that were on mine from the last lift had crumbled. I'll never use shims again.
Logged
Pages: [1]   Go Up
« previous next »