« previous next »
Pages: 1 [2]   Go Down

Author Topic: ax15  (Read 3102 times)

0 Members and 7 Guests are viewing this topic.

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: ax15
« Reply #15 on: October 28, 2010, 11:57:03 AM »
Quote from: dwtaylorpdx on October 27, 2010, 10:50:26 PM
some of the very late YJ's and Then the TJ's had the 23 spline shaft behind the Ax5 / 2.5 combo...

Dave
Where have you seen this?  Every TJ AX5 I've seen is 21spline.  Even my '95 YJ was 21spline, and it's part TJ, even the 231 internals are a crossbreed between YJ and TJ.
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: ax15
« Reply #16 on: October 28, 2010, 12:41:26 PM »
Quote from: Bounty Hunter on October 28, 2010, 11:57:03 AM
Where have you seen this?  Every TJ AX5 I've seen is 21spline.  Even my '95 YJ was 21spline, and it's part TJ, even the 231 internals are a crossbreed between YJ and TJ.

never heard of 23 spline AX-5 either, i think the late TJs had the same t-case between 4 and 6 cyl but they didn't have the AX5 anymore.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: ax15
« Reply #17 on: October 28, 2010, 12:42:55 PM »
Quote from: jfrabat on October 28, 2010, 07:46:01 AM
Mine was made in june 94; I wonder how many splines i has...  Would defenetly be interesting to put a AX15 in there.
A '94 could have been made as early as '93.  A 95.5 could be made as late as '96.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: ax15
« Reply #18 on: October 29, 2010, 12:25:27 AM »
My 94 has it. Thats why I brought it up. I was told by a dealer mechanic that Chrysler ran out of AX5 transmissions
in 94 and the later orders had the 23,, what can I say mine is the Bast*** version in more ways than that...
I know that they had a lot of trouble replacing my transmission when it blew up under warranty, took them 2 weeks to get
the parts.

Dave
Logged
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline Bounty Hunter

  • Member
  • Posts: 1658
    • http://www.sija.org
Re: ax15
« Reply #19 on: October 29, 2010, 02:47:26 AM »
First I've ever heard of one, and I rebuild a LOT of 231's.
Logged

sbsg2005

  • Guest
Re: ax15
« Reply #20 on: October 29, 2010, 09:16:11 PM »
i looked for a 23 spline out put for a ax-5 just now and couldnt even find a part number
Logged

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: ax15
« Reply #21 on: October 30, 2010, 11:17:03 AM »
I believe it was a toyota or Mazda part but since mine is working (knock on wood) I'm not going to worry too much right now..... LOL

Dave
Logged
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline lax22

  • Member
  • Posts: 103
Re: ax15
« Reply #22 on: November 03, 2010, 01:40:25 PM »
How hard is it to find an AX15 throwout bearing for this swap? From what i've heard its different from the AX5 and NV3550 one. 
Logged

Offline sharpxmen

  • Chief Squirrel BlowerŪ
  • Member
  • *
  • Posts: 7093
Re: ax15
« Reply #23 on: November 03, 2010, 01:44:06 PM »
Quote from: lax22 on November 03, 2010, 01:40:25 PM
How hard is it to find an AX15 throwout bearing for this swap? From what i've heard its different from the AX5 and NV3550 one.  

I'm pretty sure they are the same (that's what i remember) but I'll check and report back shortly
 
EDIT:

same P/N all the way to 2006 (for the 4.0L) as the one for the AX5
Timken Part # 614093  Ball Bearing; Bore=1.435", Outer Diameter=3", Width=2.008"

this is for external slave AX5
« Last Edit: November 03, 2010, 01:52:46 PM by sharpxmen »
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

sbsg2005

  • Guest
Re: ax15
« Reply #24 on: November 04, 2010, 09:09:13 PM »
it is the same throw out bearing
Logged
Pages: 1 [2]   Go Up
« previous next »