« previous next »
Pages: 1 [2] 3   Go Down

Author Topic: Rear Bumper  (Read 6358 times)

0 Members and 5 Guests are viewing this topic.

Offline sharpxmen

  • Chief Squirrel BlowerŽ
  • Member
  • *
  • Posts: 7093
Re: Rear Bumper
« Reply #15 on: November 17, 2010, 09:18:21 PM »
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline aka-justin

  • Member
  • Posts: 883
Re: Rear Bumper
« Reply #16 on: November 17, 2010, 09:55:06 PM »
Quote from: sharpxmen on November 17, 2010, 09:18:21 PM
this is for a TJ, there's no shackle.

Should have went outside and looked under there.  That shows me for slacking.  Hopefully Griffith Welding in San Jacinto won't charge me too much, but I'll have to wait until after pay day now.
Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline neale_rs

  • Member
  • Posts: 3583
Re: Rear Bumper
« Reply #17 on: November 18, 2010, 04:26:40 PM »
Once it´s trimmed it should work well and give you a good strong bumper attachment.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline sharpxmen

  • Chief Squirrel BlowerŽ
  • Member
  • *
  • Posts: 7093
Re: Rear Bumper
« Reply #18 on: November 18, 2010, 04:51:32 PM »
Quote from: 1995yj on November 17, 2010, 09:55:06 PM
Should have went outside and looked under there.  That shows me for slacking.  Hopefully Griffith Welding in San Jacinto won't charge me too much, but I'll have to wait until after pay day now.

this one is fine, i don't think it would restrict the shackle movement, that gusset would be farther away from the shackle once is tucked in there


the other one is longer and cannot be installed on the YJ, that's all i was saying.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline aka-justin

  • Member
  • Posts: 883
Re: Rear Bumper
« Reply #19 on: November 18, 2010, 10:09:37 PM »
Just picked up the bumper.  Robert did a great job.

http://picasaweb.google.com/cajeeper/RearBumper#5541122140858166514









I'll have more pictures after I paint and install it this weekend.  Robert said he's almost positive I won't need the reinforcements.  I'm going to load up some weight and test it out.  Worse case, I'll need to have them welded on.
« Last Edit: November 18, 2010, 10:10:48 PM by 1995yj »
Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline dwtaylorpdx

  • Member
  • Posts: 1038
Re: Rear Bumper
« Reply #20 on: November 20, 2010, 04:43:09 PM »
If I was ddoing it I'd just weld it in, You don't need a 100% perimeter
weld, just jack by the frame and unhook the bottom of the rear shackle
and rotate it out of the way....

Your not close enough to hurt the fuel tank... Why drop it?

Dave

Logged
94 YJ - 2.5 Hesco Cam B&B Ported - AX5 Trans w/Centerforce Dual Friction Clutch - 4" Rough Country Lift W/Skyjacker Shocks - D44 Rear/ARB - D30/ARB - ARB Compressor - Warn M8000 in Custom Bumper - Reunell Rear Bumper - Metalcloak 6" Body Armor Kit - Tuffy Console - 265x85-16 Tires - 2M Radio

Offline aka-justin

  • Member
  • Posts: 883
Re: Rear Bumper
« Reply #21 on: November 20, 2010, 11:35:00 PM »
Quote from: dwtaylorpdx on November 20, 2010, 04:43:09 PM
If I was ddoing it I'd just weld it in, You don't need a 100% perimeter
weld, just jack by the frame and unhook the bottom of the rear shackle
and rotate it out of the way....

Your not close enough to hurt the fuel tank... Why drop it?

Dave



Yeah, you're right.  I was just frustrated.  Guess it couldn't hurt, might as well.
Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline neale_rs

  • Member
  • Posts: 3583
Re: Rear Bumper
« Reply #22 on: November 22, 2010, 09:57:09 AM »
Welding should work fine.  It will be welded behind the shackle so it is not a part of the frame that has to hold up a lot of weight.  Pretty safe spot to weld.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline aka-justin

  • Member
  • Posts: 883
Re: Rear Bumper
« Reply #23 on: November 26, 2010, 02:45:29 PM »
My friends helping me prime and paint the bumper and just got the brackets welded on by Steve at Griffith Welding in San Jacinto.  Should have the black paint on by today's or tomorrow's end.







Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline neale_rs

  • Member
  • Posts: 3583
Re: Rear Bumper
« Reply #24 on: November 26, 2010, 03:35:56 PM »
It looks good.  It should work well with the stock shacles but you might need to trim it a bit if you later get boomerang shackles without the narrower central part.  With the stock shackles you will also most likely not have any hitting with the under-frame bolt head but you would with boomerang shackles.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline aka-justin

  • Member
  • Posts: 883
Re: Rear Bumper
« Reply #25 on: December 01, 2010, 08:32:44 PM »
Should have it mounted tomorrow.   :naughty:





Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Rear Bumper
« Reply #26 on: December 01, 2010, 10:56:38 PM »
Dude, Santa and his Elves are dead in your yard!
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel BlowerŽ
  • Member
  • *
  • Posts: 7093
Re: Rear Bumper
« Reply #27 on: December 01, 2010, 11:08:31 PM »
Quote from: Jeffy on December 01, 2010, 10:56:38 PM
Dude, Santa and his Elves are dead in your yard!
:roflol:

man, nothing gets by you - you always see this stuff, i was only looking at the bumper.
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline aka-justin

  • Member
  • Posts: 883
Re: Rear Bumper
« Reply #28 on: December 03, 2010, 09:10:46 AM »
It's on!  :biggrin:

Ordered two KC 26 Series 2x6 driving lights on sale for only $12 each from 4wheelparts.com ($32 - 20 Rebate).
http://www.4wheelparts.com/Lighting-and-Lighting-Accessories/26-Series-Long-Range-Light.aspx?t_c=14&t_s=448&t_pt=4242&t_pl=10170&t_pn=K%2fC1762







Logged
[1995 YJ 2.5L with 4" lift on 31" KM2 - Sold] 1995yj
[2003 TJ Rubicon 4.0L with 4" lift on 35" Wrangler M/T - Sold]
To be continued...
--Justin

Offline neale_rs

  • Member
  • Posts: 3583
Re: Rear Bumper
« Reply #29 on: December 03, 2010, 09:35:53 AM »
It looks great.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch
Pages: 1 [2] 3   Go Up
« previous next »