« previous next »
Pages: 1 ... 4 5 [6] 7 8 9   Go Down

Author Topic: Skinny's/Pizza Cutter's/Expo/etc... Thread  (Read 39238 times)

0 Members and 1 Guest are viewing this topic.

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #75 on: March 12, 2011, 04:20:44 PM »
Anyone come across pictures of a 33x10.5R15 on a 15x6 9-slot.  I'm wondering if there is enough clearance without having to add a spacer.  Although I've even thought about going to 31's if gas prices remain high.  I'd more then likely end up removing my body lift.  Will have to turn in my hardcore merit badge though.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #76 on: March 17, 2011, 10:04:22 AM »



I forgot I had these shots. I am pretty sure they are on a aftermarket wheel not a OE. But they are 33.10.50.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #77 on: March 17, 2011, 12:46:15 PM »
Quote from: FourbangerYJ on March 17, 2011, 10:04:22 AM



I forgot I had these shots. I am pretty sure they are on a aftermarket wheel not a OE. But they are 33.10.50.
The flares are a dead give away that they're on 3.75" BS aftermarket wheels.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #78 on: March 17, 2011, 12:49:15 PM »
Just picked them up.  $100.

Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #79 on: March 17, 2011, 01:34:12 PM »
Quote from: Jeffy on March 17, 2011, 12:46:15 PM
The flares are a dead give away that they're on 3.75" BS aftermarket wheels.

that's my guess too, 3.75 or 4 tops
Logged
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end

Offline neale_rs

  • Member
  • Posts: 3583
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #80 on: March 17, 2011, 01:34:34 PM »
They look like they are in good shape.  My spare seems to be on one like those.
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #81 on: March 17, 2011, 01:55:40 PM »
Quote from: Jeffy on March 17, 2011, 12:49:15 PM
Just picked them up.  $100.



That is well bought. How long until your tires come in?
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #82 on: March 17, 2011, 02:04:50 PM »
Quote from: neale_rs on March 17, 2011, 01:34:34 PM
They look like they are in good shape.  My spare seems to be on one like those.
These wheels are supposedly from a '02 or '03.  You can tell they are late model from the center cap.  I was lucky to find some late models as I think they look a little better.  The guy said they were only used a year.  His friend bought the Jeep and upgraded tires.  He bought them from his friend but used the tires only.  There is a little surface rust but not really a big deal.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #83 on: March 17, 2011, 02:05:33 PM »
Quote from: FourbangerYJ on March 17, 2011, 01:55:40 PM
That is well bought. How long until your tires come in?
National backorder from what I've heard.  I'm in no rush though.  I can wait for another sale at American Tires.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline neale_rs

  • Member
  • Posts: 3583
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #84 on: March 17, 2011, 02:50:39 PM »
Quote from: Jeffy on March 17, 2011, 02:04:50 PM
These wheels are supposedly from a '02 or '03.  You can tell they are late model from the center cap.  I was lucky to find some late models as I think they look a little better.  The guy said they were only used a year.  His friend bought the Jeep and upgraded tires.  He bought them from his friend but used the tires only.  There is a little surface rust but not really a big deal.

Ah, so the center cap is attached on the new ones. 
Logged
'95 YJ, 33 x 12.5 mud tires, RE 4.5 ED lift, Atlas 4 speed, rear D44, ARBs front and rear, 4.56 gears, 8000# winch

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #85 on: March 17, 2011, 03:31:24 PM »
Quote from: neale_rs on March 17, 2011, 02:50:39 PM
Ah, so the center cap is attached on the new ones. 
They use screws in the back like the older ones.  Just different caps.
Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chrisfranklin

  • 4BangerJP.com® Donator
  • Member
  • *
  • Posts: 1276
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #86 on: March 18, 2011, 10:47:00 PM »
That set of steel wheels you bought looks pretty good Jeffy.  Next tire change I'm probably doing 33s with the 10.5 width on 4:88s;  I'll probably just keep the tj alloys I've got now.  Can't believe you're thinking of going to 31s...would you keep your lift the same?
Logged
'94 YJ S 5spd, Borla Exhaust, CarSound Cat., PS Ceramic-coated Headers, Airraid intake, 62mm TB, Intake Manifold bored/ceramic-coated, 19lb injectors, Sharp's Adj. FPR, MeanGreen Starter, D30 Aussie locker, 31" Destination MTs, Warn XD9000, Cibie headlights, armor

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14934
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #87 on: March 18, 2011, 11:04:19 PM »
Quote from: chrisfranklin on March 18, 2011, 10:47:00 PM
That set of steel wheels you bought looks pretty good Jeffy.  Next tire change I'm probably doing 33s with the 10.5 width on 4:88s;  I'll probably just keep the tj alloys I've got now.  Can't believe you're thinking of going to 31s...would you keep your lift the same?
This Jeep is on 31x10.5R15's with 4" lift.  If I remove my body lift, I'll be about 4".  I'm going to go down to American Tires and see how long it will talk to get some 33x10.5R15 KM2's.  I've got my existing tires on CL and have gotten a few email.

Logged
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline chrisfranklin

  • 4BangerJP.com® Donator
  • Member
  • *
  • Posts: 1276
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #88 on: March 19, 2011, 04:55:45 AM »
That YJ looks pretty good with the 4" suspension lift and 31s.  Looks like it wants 33s, but the 31s still look pretty good.  

I noticed my Firestones Destinations only come in 12.5" width for the 33s.  Do like those tires a lot, but I'd probably still find 33s in a 10.5, probably a different tire make/model, maybe KM2s or something.  The KM2s are pretty well liked at TireRack http://www.tirerack.com/tires/surveyresults/surveydisplay.jsp?type=ORMT.  

Of course then you see this 4 wheeler piece http://www.fourwheeler.com/techarticles/wheels/129_1104_massive_mud_tire_shootout_intro/index.htmland they are giving the headkooks top marks, at least for the trail they were running.
« Last Edit: March 19, 2011, 04:59:32 AM by chrisfranklin »
Logged
'94 YJ S 5spd, Borla Exhaust, CarSound Cat., PS Ceramic-coated Headers, Airraid intake, 62mm TB, Intake Manifold bored/ceramic-coated, 19lb injectors, Sharp's Adj. FPR, MeanGreen Starter, D30 Aussie locker, 31" Destination MTs, Warn XD9000, Cibie headlights, armor

Offline FourbangerYJ

  • Servicing Squirrels Since 1995®
  • Member
  • *
  • Posts: 3372
Re: Skinny's/Pizza Cutter's/Expo/etc... Thread
« Reply #89 on: March 19, 2011, 11:20:33 AM »
    
Backordered Product
We apologize, but the manufacturer is currently unable to supply this product.

If you place an order for this product a member of our sales staff will contact you regarding an expected arrival date.

For additional information you may contact our sales staff at 800.589.6789.

Cut and paste from Discount Tire.
Logged
Scott~

Using tools you have not used in a while is like shaking hands with old friends. :nod:
Pages: 1 ... 4 5 [6] 7 8 9   Go Up
« previous next »