Author Topic: fan ford  (Read 2221 times)

0 Members and 3 Guests are viewing this topic.

mikeymuy

  • Guest
fan ford
« on: February 25, 2010, 01:28:00 PM »
Would a ford taurus 3.0 v6 fan work too or just the 3.8 ???

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: fan ford
« Reply #1 on: February 25, 2010, 04:19:47 PM »
Would a ford taurus 3.0 v6 fan work too or just the 3.8 ???

In all honesty, my first guess is it should work just fone to cool the 2.5L; I have the 3.8L one, and even in low speed it is more than capable of cooling down the Jeep...
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: fan ford
« Reply #2 on: February 25, 2010, 04:51:42 PM »
damn...where is my DC Control module...dying to get mine in now....
2009 Audi S5....what....its 4wd...sort of....

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: fan ford
« Reply #3 on: February 25, 2010, 05:05:22 PM »
damn...where is my DC Control module...dying to get mine in now....

I have the DC Control module connected to the high speed side, JFYR...  The low speed is connected to a relay, so that I can override the DC Control and turn the fan on (it's kind of a fail safe in case the DCC ever fails, but that has yet to happen).  In any case, with the override ON (fan turned on at low speed), I can barely make it to 190* temp (even in situations where I am in 4L, have the engine revving up, temp is above 85*, and there is no wind).
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: fan ford
« Reply #4 on: February 25, 2010, 05:39:38 PM »
Why not just put a switch between the 12 volt line and the source (I'm gonna use the lighter since I've never used it. )
2009 Audi S5....what....its 4wd...sort of....

Offline chardrc

  • Member
  • Posts: 3535
Re: fan ford
« Reply #5 on: February 25, 2010, 05:54:59 PM »
Would a ford taurus 3.0 v6 fan work too or just the 3.8 ???

 i ended up with a 3.0l fan (of the 2 speed variety (2 speed only existed for 2 years iirc for the 3.0l)).. it definitely has enough power in high... can't say much about  low speed since Ive been having bad luck with thermostats sticking so i haven't gully debugged it yet but low should be enough, and my radiator is about dead so it doesn't cool as good as it should. 
1990 YJ 4cly, ax5, 2.5 inch BDS lift, 31 MTr\'s,  Powertrax-lockers all around, track-bars removed, boomerang shackles, warn m8000 winch, electric fan. [sold but not forgotten]

2007 jk Rubicon 2dr

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: fan ford
« Reply #6 on: February 26, 2010, 07:57:25 AM »
Why not just put a switch between the 12 volt line and the source (I'm gonna use the lighter since I've never used it. )

I was not sure how well the DCC was going to work, and I wanted a way around it in case it failed (did not want to be stranded in the middle of nowhere with no cooling!).  There is a way to override the ON switch by using a switch and powering the blue cable (AC Compressor cable), as this will turn the fan on, but as I said, I wanted it to be redundant.

By the way, my rad is an aluminum radiator....
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: fan ford
« Reply #7 on: March 05, 2010, 09:13:17 AM »
OK...seriously...ordered it 3 weeks ago today...wtf??  Where is my DCC controller?
2009 Audi S5....what....its 4wd...sort of....

Offline Jeffy

  • Administrator
  • Member
  • Posts: 14933
Re: fan ford
« Reply #8 on: March 05, 2010, 11:19:50 AM »
OK...seriously...ordered it 3 weeks ago today...wtf??  Where is my DCC controller?
One guy, working from home...
Youtube Channel: https://www.youtube.com/channel/UCZNlr60GXH5OlKIFrT7P6mg
My Jeep: http://4bangerjp.com/forums/index.php?topic=2783.0
"If the motor car were invented today, there is absolutely no way that any government in the world would let normal members of the public drive one."

Offline jfrabat

  • Gargantuan Mango Tree Mechanic®
  • Member
  • *
  • Posts: 3676
  • Finally USING the Jeep!
Re: fan ford
« Reply #9 on: March 05, 2010, 11:30:16 AM »
OK...seriously...ordered it 3 weeks ago today...wtf??  Where is my DCC controller?

It takes a while, but the controler is worth the wait...
'94 YJ 2.5L with 4" RE lift, Superwinch EPi9.0, FoMoCo e-Fan, SD30 and SD35 w/ARB-5.13, 165A alt., 33" BFG KM2 on 15" AR wheels, Sony sound system, Pavement Ends Hardtop, Hydroboost

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: fan ford
« Reply #10 on: March 05, 2010, 12:43:35 PM »
bah...you're telling me that if he worked an 8 hour day, he couldn't make enough to meet demand as well as build up some stock so he could simply ship when orders came in??   :'(

I'm just pissed because it will actually be "not freezing" this weekend and would be a great time to spend two days f-ing around on the Jeep. :brick:
2009 Audi S5....what....its 4wd...sort of....

Sine Deviance

  • Guest
Re: fan ford
« Reply #11 on: March 05, 2010, 12:50:09 PM »
I'm just pissed because it will actually be "not freezing" this weekend and would be a great time to spend two days f-ing around on the Jeep. :brick:

I hear that. I'm doing my plugs/wires/cap/rotor next weekend. I hope it's warm.

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: fan ford
« Reply #12 on: March 12, 2010, 06:55:34 AM »
Just checked the tracking info...arrived at the USPS sorting center here last night.  I can't believe it may actually show up today!!
2009 Audi S5....what....its 4wd...sort of....

Offline Mozman68

  • Poseur Extraordinaire®
  • Member
  • *
  • Posts: 2660
Re: fan ford
« Reply #13 on: March 12, 2010, 08:22:58 AM »
...and it's here....sweet!!   :dance:
2009 Audi S5....what....its 4wd...sort of....

Offline sharpxmen

  • Chief Squirrel Blower®
  • Member
  • *
  • Posts: 7093
Re: fan ford
« Reply #14 on: March 12, 2010, 08:44:11 AM »
...and it's here....sweet!!   :dance:

which one did you get? variable speed or the 2 speed one?
'95 YJ, NSG370 6spd / Hurst shifter, Dana 300 + 4:1 Doubler / tri-stick, Custom skid, Super D35 / Auburn LSD / 4.88, 35x12.5x15 BFG KM2, 64mm t/b, 1.7 RollerRockers, MkVIII e-fan, Dual Diaph Booster
Latest: Corbeau BajaRS heated seats :dance: keeping warm the rear end